Sony HT-ST5000, Руководство по эксплуатации

Страница: 69 / 167

69
GB
T
rouble
s
hoot
ing
Sensors of the TV do not work
properly.

The main unit may block some
sensors (such as the brightness
sensor), the remote control receiver
of your TV or the emitter for 3D
glasses (infrared transmission) of a 3D
TV that supports the infrared 3D glass
system, or wireless communication.
Move the main unit away from the TV
within a range that allow those parts
to operate properly. For the locations
of the sensors and remote control
receiver, refer to the operating
instructions supplied with the TV.
Wireless functions (wireless LAN,
BLUETOOTH, or subwoofer) are
unstable.

Do not place metal objects other than
a TV around the system.
Music that you are not familiar with
is played suddenly.

The pre-installed sample music may
have been played. Press
on the
main unit to stop playback.
The system does not work properly.

The system may be in demo mode. To
cancel demo mode, reset the system.
Press and hold

(power) and – on
the main unit for more than 5 seconds
(page 69).
Resetting the System
If the system still does not operate
properly, reset the system as follows.
1
Press HOME.
The home menu appears on the TV
screen.
2
Select [Setup] from the home
menu.
The setup display appears on the TV
screen.
3
Select [Resetting] - [Reset to
Factory Default Settings].
4
Select the menu item you want to
reset.
5
Select [Start].
To cancel resetting
Select [Cancel] in step 5.
Press and hold

(power) and – on the
main unit for more than 5 seconds.
The settings return to their initial
status.
By resetting, the link with the subwoofer
may be lost. In this case, perform
“Performing the Wireless Connection of
the Subwoofer (SECURE LINK)” (page 45).
If You Cannot Perform
Resetting Using the Home
Menu
Note