37
GB
C:\Documents and
Settings\pc13\Desktop\JC060000_2661769142SF1000_GB\2661769142\GB05AMP_HT-SF1000-
CEL.fm
masterpage: Right
model name1[HT-SF1000]
model name2[HT-SS1000]
2-661-769-
14
(2)
Am
plifie
r O
p
erati
ons
x
A.V. SYNC. (A/V Sync)
• A.V.SYNC. Y (Yes) (Delay time: 68 ms)
The audio output is delayed so that the time
gap between the audio output and visual
display is minimized.
• A.V.SYNC. N (No) (Delay time: 0 ms)
The audio output is not delayed.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projector.
• This parameter is valid only when you use a sound
field selected with the 2CH or A.F.D. buttons.
• This parameter is not valid when PCM 96 kHz or
DTS 2048 signals are input.
x
V2 INPUT (Audio input mode for
VIDEO 2 input)
Lets you select the audio input mode for
VIDEO 2 input.
• V2 AUTO
Gives priority to digital audio signals when
there are both digital and analog
connections. If there are no digital audio
signals, analog audio signals are selected.
• V2 OPT
Specifies the digital audio signals input to
the DIGITAL VIDEO 2 OPT IN jack.
• V2 ANLG
Specifies the analog audio signals input to
the VIDEO 2 AUDIO IN (L/R) jacks.
x
CD INPUT (Audio input mode for
SA-CD/CD input)
Lets you select the audio input mode for
SA-CD/CD input.
• CD AUTO
Gives priority to digital audio signals when
there are both digital and analog
connections. If there are no digital audio
signals, analog audio signals are selected.
• CD OPT
Specifies the digital audio signals input to
the DIGITAL SA-CD/CD OPT IN jack.
• CD ANLG
Specifies the analog audio signals input to
the SA-CD/CD AUDIO IN (L/R) jacks.
Settings for the system
(SYSTEM menu)
You can use the SYSTEM menu to set the
distance of the speakers connected to this
system.
Select “6-SYSTEM” in the amplifier menus.
For details on adjusting the parameters, see
“Navigating through menus” (page 31) and
“Overview of the menus” (page 32)
SYSTEM menu parameters
x
FRT DIST. (Front speakers
distance)
Lets you set the distance from your listening
position to the front speakers (
A
). If both
front speakers are not placed an equal distance
from your listening position, set the distance as
the average distance between the front
speakers.
x
CNT DIST. (Center speaker
distance)
Lets you set the distance from your listening
position to the center speaker. Center speaker
distance should be set from a distance equal to
the front speaker distance (
A
) to a distance
1.5 meters closer to your listening position
(
B
).
30˚
30˚
100˚-120˚
100˚-120˚
A
C
D
A
B
continued
GB01COV_HT-SF1000-CEL.book Page 37 Thursday, August 24, 2006 8:27 AM
