background image

HT-SD40 (GB)  5-034-823-11(1)

Sound Bar

Operating Instructions

HT-SD40

5-034-823-

11

 (1)

Owner’s Record

The model and serial numbers are located on the bottom of the bar speaker. Record the serial numbers in 
the space provided below. Refer to them whenever you call upon your Sony dealer regarding the speaker 
system.

Model No. HT-SD40
Serial No.

WARNING

The speaker system is not disconnected 
from the mains as long as it is connected to 
the AC outlet, even if the speaker system 
itself has been turned off.

To reduce the risk of fire, do not cover the 
ventilation opening of the speaker system 
with newspapers, tablecloths, curtains, etc.
Do not expose the speaker system to naked 
flame sources (for example, lighted candles).

To reduce the risk of fire or electric shock, do 
not expose this speaker system to dripping 
or splashing, and do not place objects filled 
with liquids, such as vases, on the speaker 
system.

As the mains plug is used to disconnect the 
speaker system from the mains, connect the 
speaker system to an easily accessible AC 
outlet. Should you notice an abnormality in 
the speaker system, disconnect the mains 
plug from the AC outlet immediately.

Do not install the speaker system in a 
confined space, such as a bookcase or 
built-in cabinet.

CAUTION

Risk of explosion if the battery is replaced by 
an incorrect type.
Do not expose batteries or appliances with 
battery-installed to excessive heat, such as 
sunshine and fire.

Do not place this product close to 

medical devices. 

This product (including accessories) has 
magnet(s) which may interfere with 
pacemakers, programmable shunt valves for 
hydrocephalus treatment, or other medical 
devices. Do not place this product close to 
persons who use such medical devices. 
Consult your doctor before using this 
product if you use any such medical device.

Indoor use only.

For the bar speaker

The nameplate is located on the bottom of 
the bar speaker.

For customers in the U.S.A.

NOTE:
This speaker system has been tested and 
found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide 
reasonable protection against harmful 
interference in a residential installation. This 
speaker system generates, uses and can 
radiate radio frequency energy and, if not 
installed and used in accordance with the 
instructions, may cause harmful interference 
to radio communications. 
However, there is no guarantee that 
interference will not occur in a particular 
installation. If this speaker system does 
cause harmful interference to radio or 
television reception, which can be 
determined by turning the speaker system 
off and on, the user is encouraged to try to 
correct the interference by one or more of 
the following measures:

 

— Reorient or relocate the receiving antenna.

 

— Increase the separation between the 

speaker system and receiver.

 

— Connect the speaker system into an outlet 

on a circuit different from that to which the 
receiver is connected.

 

— Consult the dealer or an experienced 

radio/TV technician for help.

Properly shielded and grounded cables and 
connectors must be used for connection to 
host computers and/or peripherals in order 
to meet FCC emission limits.

If you have any questions about this speaker 
system:
Visit: https://www.sony.com/electronics/
support
Contact: Sony Customer Information Service 
Center at 1-800-222-SONY (7669)
Write: Sony Customer Information Service 
Center 12451 Gateway Blvd., Fort Myers, FL 
33913

Supplier’s Declaration of Conformity

Trade Name: SONY
Model No.: HT-SD40
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo, San Diego, CA 
92127 USA
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following 
two conditions: (1) This device may not cause 
harmful interference, and (2) this device 
must accept any interference received, 
including interference that may cause 
undesired operation.

CAUTION

You are cautioned that any changes or 
modifications not expressly approved in this 
manual could void your authority to operate this 
speaker system.

This speaker system must not be co-located or 
operated in conjunction with any other antenna 
or transmitter.

This speaker system complies with FCC radiation 
exposure limits set forth for an uncontrolled 
environment and meets the FCC radio frequency 
(RF) Exposure Guidelines. This speaker system 
should be installed and operated keeping the 
radiator at least 20 cm or more away from 
person’s body.

For customers in Canada

Properly shielded and grounded cables and 
connectors must be used for connection to host 
computers and/or peripherals.

This speaker system contains license-exempt 
transmitter(s)/receiver(s) that comply with 
Innovation, Science and Economic Development 
Canada’s license-exempt RSS(s). Operation is 
subject to the following two conditions:

1)  This speaker system may not cause 

interference; and

2)  This speaker system must accept any 

interference, including interference that may 
cause undesired operation of the speaker 
system. 

This speaker system complies with ISED radiation 
exposure limits set forth for an uncontrolled 
environment and meets RSS-102 of the ISED radio 
frequency (RF) Exposure rules. This speaker 
system should be installed and operated keeping 
the radiator at least 20 cm or more away from 
person’s body.

Precautions 

On safety 

• Should any solid object or liquid fall into the 

speaker system, unplug the speaker system and 

have it checked by qualified personnel before 

operating it any further.

• Do not climb on the speaker system, as you may 

fall down and injure yourself, or speaker system 

damage may result.

On power sources

• Before operating the speaker system, check that 

the operating voltage is identical to your local 

power supply. The operating voltage is indicated 

on the nameplate on the bottom of the bar 

speaker.

• If you are not going to use the speaker system 

for a long time, be sure to disconnect the 

speaker system from the wall outlet (mains). To 

disconnect the AC power cord (mains lead), 

grasp the plug itself; never pull the cord.

• One blade of the plug is wider than the other for 

the purpose of safety and will fit into the wall 

outlet (mains) only one way. If you are unable to 

insert the plug fully into the outlet, contact your 

dealer.

• The AC power cord (mains lead) must be 

changed only at a qualified service shop.

On heat buildup

Although the speaker system heats up during 
operation, this is not a malfunction.
If you continuously use this speaker system at 
high volume, the speaker system temperature at 
the rear and bottom rises considerably. To avoid 
burning yourself, do not touch the speaker 
system.

On placement

• Place the speaker system in a location with 

adequate ventilation to prevent heat buildup 

and prolong the life of the speaker system.

• Do not place the speaker system near heat 

sources or in a place subject to direct sunlight, 

excessive dust, or mechanical shock.

• Do not place anything on the top of the bar 

speaker.

• If the speaker system is being used in 

combination with a TV, VCR, or tape deck, noise 

may result and picture quality may suffer. In 

such a case, place the speaker system away 

from the TV, VCR, or tape deck.

• Use caution when placing the speaker system 

on a surface that has been specially treated 

(with wax, oil, polish, etc.), as staining or 

discoloration of the surface may result.

• Take care to avoid any possible injury from the 

corners of the bar speaker.

On operation

Before connecting other equipment, be sure to 
turn off and unplug the speaker system.

If you encounter color irregularity on a 

nearby TV screen

Color irregularities may be observed on certain 
types of TV.
• If color irregularity is observed... 

Turn off the TV, then turn it on again after 15 to 

30 minutes.

• If color irregularity is observed again... 

Place the speaker system further away from the 

TV.

On cleaning

• Clean the speaker system with a soft, dry cloth. 

Do not use any type of abrasive pad, scouring 

powder, or solvent such as alcohol or benzine.

If you have any questions or problems concerning 
your speaker system, please consult your nearest 
Sony dealer.

About These Operating 

Instructions

• The instructions in these Operating Instructions 

describe the controls on the remote control.

• Some illustrations are presented as conceptual 

drawings, and may be different from the actual 

products.

• Characters in brackets [ ] appear in the front 

panel display.

Installation and 

Connection

Connecting a TV with an HDMI 

Cable and/or Optical Cable

Refer to Startup Guide (separate document).

Mounting the Bar Speaker on a 

Wall

You can mount the bar speaker on a wall.

Notes

• Prepare screws (not supplied) that are suitable for the wall 

material and strength. As a plasterboard wall is especially 

fragile, attach the screws securely in the wall beam. Install 

the bar speaker horizontally, hung by screws in studs in a 

continuous flat section of the wall.

• Have the installation done by a Sony dealer or licensed 

contractor and pay special attention to safety during the 

installation.

• If using a cable with a large plug, it may not be possible to 

mount the bar speaker on a wall.

• Sony shall not be held responsible for accidents or damage 

caused by improper installation, insufficient wall strength, 

improper screw installation, natural disasters, etc.

Prepare two screws (not supplied) that are 

suitable for the wall mount holes on the rear 

of the bar speaker.

4 mm 

(3/16 in)

30 mm (1 3/16 in) or more

5.1 mm 

(7/32 in)
10 mm 

(13/32 in)

Hole on the rear of 

the bar speaker

Align the vertical line above the “  

 TV 

CENTER LINE” printed on the WALL MOUNT 

TEMPLATE (supplied) with the center of the 

width of your TV.

Center of the TV

WALL MOUNT 

TEMPLATE

Align the “  

 TV BOTTOM LINE” printed on 

the WALL MOUNT TEMPLATE with the bottom 

of your TV, then adhere the WALL MOUNT 

TEMPLATE on the wall with a commercially 

available adhesive tape, etc. 

Adhesive 

tape, etc.

WALL MOUNT 

TEMPLATE

Fasten the screws prepared in step 1 securely 

into the screw marks (

) on the “  

 SCREW 

LINE” printed on the WALL MOUNT TEMPLATE. 

368.5 mm  

(14 1/2 in)

368.5 mm  

(14 1/2 in)

10.5 mm to 

11.5 mm

Screws

Marks (

)

(approx. 

7/16 in)

737 mm  

(29 in)

Remove the WALL MOUNT TEMPLATE.

Hang the bar speaker on the screws.

Align the holes on the rear of the bar speaker 
with the screws, then hang the bar speaker on 
the two screws.

Note

When sticking WALL MOUNT TEMPLATE, smooth it out fully.

Connecting the Subwoofer 

Manually

If you cannot connect the subwoofer to the 
speaker system, or you use multiple wireless 
products and want to specify the wireless 
connection to link the speaker system to the 
subwoofer, perform the manual connection.

Power indicator

LINK

 (BLUETOOTH) button

+ (volume) button

Press and hold   (BLUETOOTH) and + (volume) 

on the bar speaker for more than 5 seconds.

[SECURE LINK] appears, then[LINK] flashes in 
the front panel display.
To cancel the manual connection, press and 
hold   (BLUETOOTH) and + (volume) on the bar 
speaker for more than 5 seconds again.

Press LINK on the subwoofer.

The manual connection starts.
The power indicator of the subwoofer flashes 
in amber.

Make sure that [DONE] appears in the front 

panel display.

The manual connection is established and the 
power indicator of the subwoofer lights in 
amber.

Note

If [ERROR] appears in the front panel display, the connection 

of the subwoofer has not been established. Perform the 

manual connection again.

Parts and Controls

Bar Speaker 

Front

 

 (power) button

Turns on the speaker system or sets it to 
standby mode. 

 

 (TV) button

   (BLUETOOTH) button

  +/– (volume) buttons

  BLUETOOTH indicator

 

— Flashes twice in blue: During pairing 

standby status

 

— Flashes in blue: BLUETOOTH connection is 

being attempted.

 

— Lights in blue: BLUETOOTH connection has 

been established. 

  Front panel display

  Remote control sensor

Point the remote control at the remote control 
sensor to operate the speaker system. 

Rear

  AC inlet

  HDMI OUT (TV (ARC)) jack

Connect a TV that has an HDMI input jack with 
an HDMI cable. The speaker system is 
compatible with Audio Return Channel (ARC). 
ARC is the function that sends TV sound to an 
AV device such as the speaker system from 
the TV’s HDMI jack. 

  TV IN (OPTICAL) jack

  IR repeater

Transmits the remote signal of the TV remote 
control to the TV.

  UPDATE port

Connect the USB memory when updating the 
speaker system.

Subwoofer 

  Power indicator

 

— Lights in green: The subwoofer is connected 

to the speaker system.

 

— Lights in red: The subwoofer is in standby 

mode.

 

— Lights in amber: The subwoofer is 

connected to the speaker system with the 

manual connection.

 

— Flashes slowly in green: The subwoofer is 

attempting to connect to the speaker 

system.

 

— Flashes slowly in amber: The subwoofer is 

attempting to connect to the speaker 

system with the manual connection.

 

— Flashes twice in amber: The subwoofer is in 

pairing standby status with the manual 

connection.

 

— Flashes quickly in amber: The software is 

updating.

 

— Turns off: The subwoofer is turned off. 

 

 (power) button

Turns on or off the subwoofer. 

  LINK button

  AC inlet

Remote Control

Some buttons function differently depending on 
how long the button is pressed. This section 
explains the functions when pressed shortly.
For details about other functions, refer to 
“Changing the Settings” on the back page.

 INPUT 

Selects the input for playback on the speaker 
system.
Each time you press INPUT, the input source 
toggles between the TV and BLUETOOTH 
input.

  SOUND FIELD

Turns on/off the surround effect. 

 

 (volume) +*/–

Adjusts the volume. 

  BASS +/–

Adjusts the subwoofer volume.

 

 (power)

Turns on the speaker system or sets it to 
standby mode.

 VOICE

Turns on/off the voice mode. 

 NIGHT

Turns on/off the night mode. 

 

 (muting)

Mutes the sound temporarily.

*  The 

 (volume) + button has a tactile dot. Use it as a 

guide during operation.

About the replacement of batteries for the 

remote control

When the speaker system does not respond by 
operating with the remote control, replace two 
batteries with new batteries.
Use R03 (size AAA) manganese batteries for 
replacement.

Listening to Music/Sound

Listening to a TV Connected with 

an HDMI Cable (ARC) or Optical 

Digital Cable

You can listen to TV sound on the speaker system.

INPUT

 (volume) +/–

BASS +/–

Press INPUT repeatedly to select [TV] in the 

front panel display.

Adjust the volume.

• Adjust the volume by pressing 

 (volume) 

+/– on the remote control.

• Adjust the subwoofer volume by pressing 

BASS +/– on the remote control.

Note

When you connect the TV to both the HDMI OUT (TV (ARC)) 

and TV IN (OPTICAL) jacks, the jack for audio input is selected 

depending on which audio signal is input first. 

Tip

You can also select the input by pressing 

 (TV) on the bar 

speaker.

Listening to Music from a Mobile 

Device with the BLUETOOTH® 

Function

You can listen to music stored on a mobile device 
such as a smartphone or tablet via wireless 
connection by connecting the speaker system and 
the mobile device with the BLUETOOTH function. 
When connecting to the mobile device with the 
BLUETOOTH function, you can perform operations 
simply through the speaker system without 
turning the TV on.

Listening to Music by Pairing with a 

Mobile Device 

You need to perform pairing of the speaker 
system and mobile device by using the 
BLUETOOTH function.
Pairing is the process required to mutually register 
the information on BLUETOOTH devices to be 
connected wirelessly in advance.

 (volume) +/–

BASS +/–

Press and hold   (BLUETOOTH) on the bar 

speaker for 2 seconds.

 (BLUETOOTH) 

button

Make sure that the BLUETOOTH indicator on 

the bar speaker flashes twice repeatedly in 

blue and [PAIRING] appears in the front panel 

display. 

The speaker system enters the pairing mode. 

On the mobile device, search for the speaker 

system by performing the pairing operation.

The list of the BLUETOOTH devices that are 
detected appears on the screen of the mobile 
device. 
For the operation method to pair the 
BLUETOOTH device to the mobile device, refer 
to the operating instructions of the mobile 
device.

Pair the speaker system and mobile device by 

selecting “HT-SD40” from the list on the screen 

of the mobile device.

If a passkey is requested, enter “0000.”

Make sure that the BLUETOOTH indicator on 

the bar speaker lights in blue and [BT] appears 

in the front panel display. 

A connection between the speaker system and 
mobile device has been established.

Start audio playback with the music app on 

the connected mobile device.

Sound is output from the speaker system.

Adjust the volume.

• Adjust the volume by pressing 

 (volume) 

+/– on the remote control.

• Adjust the subwoofer volume by pressing 

BASS +/– on the remote control.

Notes

• You can pair up to 9 BLUETOOTH devices. If a 10th 

BLUETOOTH device is paired, the oldest connected device 

will be replaced by the new one.

• Perform pairing for the second and subsequent mobile 

devices.

Tips

• You can check the connection status of the BLUETOOTH 

function by checking the BLUETOOTH indicator status.

• While the BLUETOOTH input is being selected, the speaker 

system enters the pairing mode by pressing   (BLUETOOTH) 

on the bar speaker shortly.

Listening to Music from the Paired 

Mobile Device

INPUT

 (volume) +/–

BASS +/–

Turn the BLUETOOTH function of the mobile 

device on.

Press INPUT repeatedly to select [BT] or press 

 (BLUETOOTH) on the bar speaker shortly.

The BLUETOOTH indicator flashes and the 
speaker system automatically reconnects to the 
BLUETOOTH device it was most recently 
connected to.

Make sure that the BLUETOOTH indicator on 

the bar speaker lights in blue and [BT] appears 

in the front panel display. 

A connection between the speaker system and 
mobile device has been established.

Start audio playback with the music app on 

the connected mobile device.

Sound is output from the speaker system.

Adjust the volume.

• Adjust the volume by pressing 

 (volume) 

+/– on the remote control.

• Adjust the subwoofer volume by pressing 

BASS +/– on the remote control.

Adjusting the Sound

Enjoying Surround Effect (SOUND 

FIELD) 

You can turn the surround effect on or off to suit 
sound sources. 

SOUND FIELD

Press SOUND FIELD to select the setting.

The setting appears in the front panel display. 

Setting

Explanation

[SF.ON]

The sound is output with the 
surround effect.
This setting is suitable for 
experiencing the surround 
sound with presence.

[SF.OFF]

The sound is output without 
the surround effect.
This setting is suitable for 
listening to music or news.

Making Dialogs Clearer (VOICE)

VOICE

Press VOICE to select the setting.

The setting appears in the front panel display. 

Setting

Explanation

[Vo.ON]

Dialog is easily heard by 
enhancing dialog range.

[Vo.OFF]

Deactivates the voice mode 
function.

Enjoying Clear Sound with Low 

Volume at Midnight (NIGHT) 

NIGHT

Press NIGHT to select the setting.

The setting appears in the front panel display. 

Setting

Explanation

[N.ON]

Sound is output at low volume 
with minimum loss of fidelity 
and clarity of dialog.

[N.OFF]

Deactivates the night mode 
function.

Note

When you turn the speaker system off, this setting is set to 

[N.OFF] automatically.

Using the Speaker System 

by Interlocking with a TV

Operating the Speaker System 

by Interlocking with a TV 

(Control for HDMI Function) 

Connecting a TV compatible with the Control for 
HDMI function using an HDMI cable enables you 
to interlock the speaker system operation such as 
power on/off or volume adjustment with a TV.

About the Control for HDMI function

The Control for HDMI function is a function that 
enables operation of devices connected with an 
HDMI (High-Definition Multimedia Interface) cable 
by interlocking them.
Although this function works for devices 
compatible with the Control for HDMI function, it 
may not work if connecting devices other than 
those manufactured by Sony.

Preparing to Operate by Interlocking 

with a TV

Enable the Control for HDMI function settings of 
the TV connected to the speaker system with an 
HDMI cable.
The default setting of the Control for HDMI 
function of the speaker system is [ON]. 

Tips 

• When connecting a device such as a Blu-ray Disc player to a 

TV with an HDMI cable, enable its Control for HDMI function.

• To enable the Control for HDMI function of a TV or Blu-ray 

Disc player, refer to their operating instructions.

• If you enable the Control for HDMI (“BRAVIA” sync) function 

when using a TV manufactured by Sony, the Control for 

HDMI function of the speaker system is also enabled 

automatically. When the setting is complete, [DONE] 

appears in the front panel display.

Performing Power Operation or 

Volume Adjustment by a TV Remote 

Control

When turning the TV on/off or adjusting the 
volume using the TV remote control, the speaker 
system power operation or volume adjustment is 
interlocked.

Power interlocking

When you turn on or off the TV, the speaker 
system will turn on or off automatically.

Note

If you turn off the speaker system before turning off the TV, 

the speaker system may not turn on automatically even 

though you turn on the TV next time. In this case, perform 

the following operation.

 

— Select the speaker system for the sound output device in 

the TV menu.

 

— When using Sony TV, turn on the speaker system while the 

TV is turned on.

Volume adjustment

The sound of the TV you are watching is output 
from the speaker system automatically. You can 
adjust the speaker system volume by the TV 
remote control.

Tip 

You can change the Control for HDMI settings by following 

procedure. 

Press and hold VOICE on the remote control for more 
than 5 seconds.

[CONTROL FOR HDMI] appears in the front panel display.

Press 

 (volume) +/– on the remote control to display 

the desired setting in the front panel display.

Wait until the displayed setting disappears from the front 
panel display.

The setting is fixed.

Operating the Speaker System 

by Interlocking with a TV 

Compatible with the “BRAVIA” 

Sync Function

“BRAVIA” Sync is an extended function developed 
by Sony based on the Control for HDMI function. 
By connecting “BRAVIA” Sync-compatible devices 
such as a TV using an HDMI cable, you can control 
the devices by interlocking them with each other.

To use “BRAVIA” Sync

“BRAVIA” Sync is enabled by enabling the Control 
for HDMI function of the Sony device. For the 
operation to enable the Control for HDMI function, 
see “Preparing to Operate by Interlocking with a 
TV.”

What You Can Do with “BRAVIA” Sync

Control for HDMI function

• Power interlocking
• Volume adjustment

Saving Power 

Consumption

To use the speaker system with saving power 
consumption, change the following settings.

Turning the Speaker System Off 

by Detecting the Using State

When you set the auto standby function to on, 
the speaker system enters standby mode 
automatically when you do not operate the 
speaker system for about 20 minutes and the 
speaker system is not receiving an input signal. 

Press and hold 

 (power) and 

 (TV) on the 

bar speaker for more than 5 seconds.

[AUTO STANDBY] and the current setting 
appear in the front panel display.

Press 

 (volume) +/– on the remote control 

to display the desired setting in the front 

panel display.

Wait until the displayed setting disappears 

from the front panel display.

The setting is fixed.

Saving Power in Standby Mode

To save power consumption during the standby 
mode, set the BLUETOOTH standby mode and 
Control for HDMI function to off.
To change the BLUETOOTH standby mode setting, 
press and hold 

 (power),   (BLUETOOTH), and 

– (volume) on the bar speaker for more than 5 
seconds (the changed setting appears in the front 
panel display). 
To change the Control for HDMI function setting, 
press and hold VOICE on the remote control for 
more than 5 seconds to display the setting in the 
front panel display, then press 

 (volume) +/– on 

the remote control to select the desired setting.

Continued on back page

Содержание HT-SD40
















Отзывы: