background image

2

GB

Do not install the speaker system in a 
confined space, such as a bookcase or 
built-in cabinet.

To reduce the risk of fire, do not cover 
the ventilation opening of the speaker 
system with newspapers, tablecloths, 
curtains, etc.
Do not expose the speaker system to 
naked flame sources (for example, 
lighted candles).

To reduce the risk of fire or electric 
shock, do not expose this speaker 
system to dripping or splashing, and do 
not place objects filled with liquids, such 
as vases, on the speaker system.

The speaker system is not disconnected 
from the mains as long as it is connected 
to the AC outlet, even if the speaker 
system itself has been turned off.

As the mains plug is used to disconnect 
the speaker system from the mains, 
connect the speaker system to an easily 
accessible AC outlet. Should you notice 
an abnormality in the speaker system, 
disconnect the mains plug from the AC 
outlet immediately.

CAUTION

Risk of explosion if the battery is 
replaced by an incorrect type.
Do not expose batteries or appliances 
with battery-installed to excessive heat, 
such as sunshine and fire.

Do not place this product close 
to medical devices. 

This product (including accessories) has 
magnet(s) which may interfere with 
pacemakers, programmable shunt 
valves for hydrocephalus treatment, or 
other medical devices. Do not place this 
product close to persons who use such 
medical devices. Consult your doctor 

before using this product if you use any 
such medical device.

Indoor use only.

Recommended cables

Properly shielded and grounded cables 
and connectors must be used for 
connection to host computers and/or 
peripherals.

For the bar speaker and surround 
speakers

The nameplates are located on the 
bottom of the bar speaker and surround 
speakers.

This equipment has been tested and 
found to comply with the limits set out in 
the EMC regulation using a connection 
cable shorter than 3 meters.

For customers in Europe

Notice for customers: the 
following information is only 
applicable to equipment sold in 
countries applying EU directives 
and/or UK applying relevant 
statutory requirements

This product has been manufactured by 
or on behalf of Sony Corporation.

EU and UK Importer: Sony Europe B.V.

Inquiries to the EU Importer or related to 
product compliance in Europe should be 
sent to the manufacturer’s authorized 
representative, Sony Belgium, 
bijkantoor van Sony Europe
B.V., Da Vincilaan 7-D1, 1930 Zaventem, 
Belgium.
Inquiries to the UK Importer or related to 
product compliance in the UK should be 
sent to the manufacturer’s authorized 
representative, Sony Europe B.V., The 
Heights, Brooklands, Weybridge, Surrey 
KT13 0XW, United Kingdom.

WARNING

Содержание HT-S40R





















































Отзывы: