Sony HT-RD150, Руководство по эксплуатации

Страница: 25 / 48

25
Se
t-
U
p
M
e
nu
4
Press M / m to select the item you want to
set.
Example: “FRONT DIST” (front speaker
distance)
5
Press ENTER or , .
6
Press M / m to select a setting.
The setting is applied to the system.
7
Press ENTER or AMP MENU to turn off the
AMP menu.
To return to the previous layer
Press
<
.
To operate the connected component after
setting
Select the component (input source) by pressing
DVD, VIDEO, or TUNER/BAND after turning
off the AMP menu.
Note
Turn off the AMP menu after finishing the AMP menu
setup. When you do not turn off the AMP menu, some
buttons on the remote may not work.
Basic Speaker Settings (SP
SETUP)
You can input the speaker positions and select
whether or not to engage any centre or surround
speakers.
Select “SP SETUP” (speaker setup) in the AMP
menu. To use the AMP menu, see “Using the
AMP Menu” (page 24). For details about setting
speaker distance, see also “Step 6: Basic Speaker
Setup” (page 15).
The default settings are underlined.
Notes
• The settings below may not be the defaults if you
followed “Step 6: Basic Speaker Setup” (page 15) to
reflect the current speaker placement.
• Change your current settings again should you change
the speaker positions.
• The centre speaker is built in to the centre unit.
“CENTER SP” (centre speaker)
“SURR SP” (surround speaker)
m
L R
“CENTER YES” Normally select this.
“CENTER NO”
Select this if no centre
speaker is used.
“BEHIND” Select this if surround
speakers are located in
B
.
“SIDE” Select this if surround
speakers are located in
A
.
“NONE” Select this if no surround
speaker is used.
90
20
45
A A
B B
, continued