Sony HT-RD150, Руководство по эксплуатации, Страница: 15 / 48

15
H
ook
up
s and
Se
tti
n
gs
Step 6: Basic Speaker
Setup
To fully enjoy the system’s sound, reflect the
current speaker positions in the system. Enter the
speaker distance from your listening position
using the AMP menu in the centre unit display.
For details about the AMP menu, see page 24;
about speaker placement, see page 9.
1
Press
[
/
1
to turn on the system.
2
Press AMP MENU repeatedly until the AMP
menu (page 24) appears in the centre unit
display.
3
Press
M
/
m
to select “SP SETUP” (speaker
setup), and press ENTER or , .
Example:
4
Press M / m to select “SURR SP” (surround
speaker), and press ENTER or , .
5
Press M / m to select the setting for the
surround speaker position.
If unsure about the position, see ““SURR SP”
(surround speaker)” on page 25.
6
Press < to return to the previous layer.
7
Press
M
/
m
to select “FRONT DIST” (front
speaker distance), and press ENTER or
, .
8
Press
M
/
m
to set the front speaker
distance from the listening position.
The display changes in 0.2 m increments,
from 1.0 to 7.0 m. Enter the shorter distance if
the two speaker distances differ.
Example: When entering 5.8 m for the front
left and right speakers.
9
Press < to return to the previous layer.
10
Repeat steps 7 to 9 to set “CEN DIST”
(centre speaker distance) and “SURR
DIST” (surround speaker distance).
11
Press AMP MENU to turn off the AMP
menu.
To better adjust the speaker
You can change the speaker level, etc. See
“Speaker Level Settings (LEVEL)” (page 26).
To return to the previous layer
Press < .
To operate the connected component after
setting
Select the component (input source) by pressing
DVD, VIDEO, or TUNER/BAND after turning
off the AMP menu.
Basic hookups and settings are complete.
You are ready to start using the system.
AMP MENU
< / M / m / , ,
ENTER
" / 1
SL SR
m
L R
m
L R