Sony HT-RD150, Руководство по эксплуатации

Страница: 8 / 48

8
A
Wiring the speakers
Connect the supplied speakers to the SPEAKER
jacks on the bottom side of the subwoofer using
the speaker cords.
Use the speaker cord whose tube is the same
colour as the jack label on the connecting speaker.
Notes
• Cover the floor with a cloth when connecting.
• Be sure to match the polarity of the speaker cord and
the terminal on the component; 3 to 3 (grey), # to #
(black). If reversed, the sound will lack bass and may
be distorted.
Notes on speaker cord treatment
• Do not insert the speaker cord insulation in the
speaker terminals. Bend the stripped cord at the
end of the insulation before connecting.
• To prevent short-circuiting of the speakers,
make sure the stripped speaker cord does not
touch the other stripped speaker cord or the
terminal.
Example:
B
Connecting the subwoofer and
the centre unit
Connect the system cord of the centre unit to the
SYSTEM CONTROL jack of the subwoofer,
then, connect the speaker cord to the CENTER
SPEAKER jack. Insert the SYSTEM CONTROL
plug fully until it clicks.
Notes
• If the system cord is disconnected while the power is
on, the system enters standby mode (page 14).
• After connecting the speakers, centre unit, and the
mains leads, you can check for a speaker short-circuit
using the test tone (page 27). If the test tone is not
output, or is output from a speaker other than indicated
in the centre unit display, check the speaker
connection.
• Be sure to connect the system cord to the subwoofer’s
SYSTEM CONTROL jack properly oriented to avoid
damage to the jack or system cord.
Colour tube
Grey
Black
(–)
(+)
(–)
(+)
Too much insulation is
removed. Stripped cords are
touching each other.
Stripped cords are touching
the other speaker terminals.
SYSTEM CONTROL
AERIAL
DVD
DIGITAL IN OPTICAL
VIDEO
ANALOG IN
L R
AM
FM
75 COAXIAL
ONTROL
to SYSTEM CONTROL