Sony HT-NT5, Руководство по обслуживанию, Страница: 37 / 74

HT-NT5
37
12. Log: Error Log (Output of each Log)
This screen displays the contents of each log.
Note 1: Do not refer to the displayed date.
Screen 1: Selects log
Operation:
[ ] Moves to the Error Log output screen
[BACK] Returns to the top menu of the service mode
Screen 2: Displays the Error Log
(Displayed characters/values in the following fi gure are example)
Operation:
[
B
] Returns to the previous page
[
b
] Moves to the next page
[BACK] Returns to the screen (Screen 1) that selects the log
type
[RED] Writes the log contents to an USB memory device
• Viewing the log display
Error Log:
[001] 2010/01/01 00:00:05 [ErrCode:0902A4053002]
Index
number Date Time Error code
About copying log to USB memory device:
Press the [RED] button in each log display screen with the USB
memory device inserted into the unit.
Note 2: Don’t press the [RED] button immediately after USB memory is
inserted.
Don’t pull out USB memory immediately after the [RED] button
was pressed.
Error Log:
When
“getErrLogFile.trm” fi le exists in the USB memory de-
vice, “errlog.log” fi le is output.
Select Log
HELP : [DOWN][ENT][(NUM)]
Error Log
[000] 2010/01/01 00:00:00 [ErrCode:0A0100000000]
[001] 2010/01/01 00:00:05 [ErrCode:0902A4053002]
[002] 2010/01/01 00:00:04 [ErrCode:0902A4053002]
[003] 2010/01/01 00:00:06 [ErrCode:0902A4053002]
[004] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
[005] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
[006] 2010/01/01 00:00:05 [ErrCode:0902A4053002]
[007] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
[008] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
[009] 2010/01/01 00:00:05 [ErrCode:0902A4053002]
[010] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
[011] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
[012] 2010/01/01 00:00:06 [ErrCode:0902A4053002]
[013] 2010/01/01 00:00:01 [ErrCode:0A0100000000]
<Page 1/3>
HELP : Press [RED] key to store log to Udisc.
[1] Error Log
[2] HDD Log
(Screen 1)
(Screen 2)
13. Log (HDD Log)
Note:
Not used in this unit.
14. Factory Initialize (Factory Settings)
Return all of the unit setting to their factory defaults (Refer to
“INITIALIZING METHOD” on page 7).
15. Network (Network Test Diagnosis)
Note: Not used in this unit.
16. Version UP
Note: Not used for the servicing.
17. System Information (System Information Display)
This screen displays system information.
Screen 1: Basic Information
Operation:
[
b
] Drive information (delta IOP of a drive is measured)
and wireless device information displayed (go to
Screen 2)
[BACK] Returns to the top menu of the service mode
Screen 2: Drive and Wireless Information Menu
Operation:
[
B
] Basic Information displayed (go to Screen 1)
[BACK] Returns to the top menu of the service mode
For drive not equipped, information of drive does not appear.
System Information
Sequence Number:
MAC:
Model:
Destination:
Main LSIname:
IP:
IF-con Main Version: Sub Version :
Bootloader Version:
IFCon ADSP Coeff Version:
Host Main Version:
MicroBE Version:
Host Sub Version:
Middleware Version:
ADSP Version:
ADSP Coeff Version:
2nd DSP Version:
ADSP Version:
HELP: [RET] [RIGHT]
(Screen 1)
System Information
Drive Firm Revision:
WLAN module MAC Address:
WLAN module Serial:
WLAN module hw version:
IF_MODEL:
IF_DEST:
Bluetooth Device Address::
HELP: [RET] [LEFT]
(Screen 2)
18. EMC Test Mode
Note: Not used for the servicing.
19. Drive
Note: Not used in this unit.
20. HDD Mode
Note: Not used in this unit.
21. RF TEST MODE
Note: Not used for the servicing.