Sony HT-M3, Руководство по эксплуатации

Страница: 40 / 128

40 US
3
Press MEMORY.
4
Press the numeric buttons to
select a preset number.
You can also press or
PRESET – to select a preset number.
5
Press ENTER.
The station is stored as the selected preset
number.
6
Repeat steps 1 to 5 to store
another station.
1
Press TUNER repeatedly (or
press FM or AM) to select the
FM or AM band.
2
Press or PRESET –
repeatedly to select the station.
Each time you press the button, you can
select a preset station as follows:
You can also press the numeric buttons to
enter the preset station. To tune to the
selection, press ENTER.
1
Press TUNER repeatedly (or
press FM or AM) to select the
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Tune to the preset station you
want to create an index name
for (page 40).
3
Press AMP MENU.
4
Press V / v repeatedly to select
“TUNER”, then press or b .
5
Press V / v repeatedly to select
“NAME IN”, then press or b .
The cursor flashes and you can enter a
character.
6
Press V / v to select a character,
then press B / b to move the
input position backward and
forward.
You can enter up to 8 characters to name
the station.
Tips
• You can select the character type as follows
by pressing
V
/
v
.
Alphabet (upper case)
t
Numbers
t
Symbols
• To enter a blank space, press
b
without
selecting a character.
If you made a mistake
Press B / b until the character you want to
change flashes, then press
V
/
v
to select
the correct character.
7
Press .
The name you entered is registered.
Tuning to preset stations
Naming preset stations