Sony HT-M22, Руководство по эксплуатации

Страница: 40 / 68

40
GB
Preparing for the
“BRAVIA” Sync
The receiver is compatible with the
“Control for HDMI-Easy Setting”
function.
• If your TV is compatible with the
“Control for HDMI-Easy Setting”
function, you can set the Control for
HDMI function of the receiver and
playback equipment automatically by
setting the Control for HDMI function on
your TV (page 40).
• If your TV is not compatible with the
“Control for HDMI-Easy Setting”
function, set the Control for HDMI
function of the receiver, playback
equipment and TV individually
(page 40).
If your TV is compatible
with the “Control for HDMI-
Easy Setting” function
1
Connect the receiver, TV and
playback equipment via HDMI
connection (page 18, 21).
(The respective equipment must be
compatible with the Control for HDMI
function.)
2
Turn on the receiver, TV and
playback equipment.
3
Turn on the Control for HDMI
function of the TV.
The Control for HDMI function of the
receiver and all the connected equipment
are turned on simultaneously. Wait until
“COMPLETE” appears. The setup is
complete.
For details on setup of the TV, refer to the
operating instructions of your TV.
If your TV is not compatible
with the “Control for HDMI-
Easy Setting” function
1
Press AMP MENU.
2
Press V / v repeatedly to select
“HDMI”, then press or
b
.
3
Press
V
/
v
repeatedly to select
“CTRL HDMI”, then press or b .
4
Press V / v repeatedly to select
“CTRL ON”, then press .
Control for HDMI function is turned on.
5
Set the Control for HDMI function of
the connected equipment to on.
If the Control for HDMI function is
already set to on, you do not need to
change the setting.
For details on setting the TV and
connected equipment, refer to the
operating instructions of the respective
equipment.
• When you unplug the HDMI cable or change the
connection, perform the steps given in “If your
TV is compatible with the “Control for HDMI-
Easy Setting” function” (page 40) or “If your
TV is not compatible with the “Control for
HDMI-Easy Setting” function” (page 40).
• Before you perform the “Control for HDMI-
Easy Setting” on your TV, be sure to turn on the
TV and other connected equipment including
the receiver first.
• If the playback equipment cannot function after
you have made the settings for “Control for
HDMI-Easy Setting”, check the Control for
HDMI setting of the playback equipment.
• If the connected equipment does not support the
“Control for HDMI-Easy Setting”, but still
supports the Control for HDMI, then you need
to set the Control for HDMI function of the
connected equipment before you perform the
“Control for HDMI-Easy Setting” from the TV.
Notes
,
V / v / B / b
AMP
MENU