Sony HT-GT1, Руководство по эксплуатации

Страница: 35 / 52

35
GB
HT-GT1.GB.4-542-874- 12 (1)
Other Oper
ations
Enjoying the Party Chain
Perform the following procedure to
activate the Party Chain function.
1
Plug in the power cord and turn
on all the systems.
2
Adjust the volume on each
system.
3
Activate the Party Chain
function on the system to be
used as the Party Host.
Press FUNCTION on the Party Host
repeatedly to select the function
you want (except the audio in
function), then start playback.
Press PARTY CHAIN on the Party
Host, or hold down PARTY CHAIN on
the Party Host.
“PARTY” and “CHAIN” appear on the
display. The Party Host starts the
Party Chain, and other systems
become Party Guests automatically.
All systems play the same music as
that being played by the Party Host.
To select a new Party Host
When you make connection

, you
can select another system as a new
Party Host.
Repeat step 3 of “Enjoying the Party
Chain” on the system to be used
as a new Party Host. The current
Party Host becomes Party Guest
automatically. All systems play the
same music as that being played by
the new Party Host.
To deactivate the Party Chain
Press PARTY CHAIN on the Party
Host, or hold down PARTY CHAIN on
the Party Host.
Notes
ˎ
Depending on the total unit of systems
you have connected, Party Guests may
take some time to start playing the
music.
ˎ
Changing the volume level and sound
effect on the Party Host will not affect
the output on the Party Guests.
ˎ
The Party Guests continue playing the
music source from the Party Host even
if you change the function on any of the
Party Guests. However, you can adjust
the volume and change the sound
effect on any of the Party Guests.
ˎ
When you use the microphone on Party
Host, the sound will not be output from
Party Guests.
ˎ
The system which is not equipped with
Party Chain function cannot become a
Party Host.
ˎ
For detailed operation on other
systems, refer to the operating
instructions of the systems.