Sony HT-GT1, Руководство по эксплуатации

Страница: 44 / 52

HT-GT1.GB.4-542-874- 12 (1)
44
GB
The sound skips or fluctuates, or
the connection is lost.
ˎ
The system and the BLUETOOTH
device are too far apart.
ˎ
If there are obstacles between
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
ˎ
If there is equipment that
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
The sound of your BLUETOOTH
device cannot be heard on this
system.
ˎ
Increase the volume on your
BLUETOOTH device first, then
adjust the volume using VOL +/−.
There is severe hum, noise or
distorted sound.
ˎ
If there are obstacles between
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
ˎ
If there is equipment that
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
ˎ
Turn down the volume of the
connected BLUETOOTH device.
Party Chain
Party Chain function cannot be
activated.
ˎ
Check the connections
(page 33).
ˎ
Make sure the audio cords are
connected correctly.
ˎ
Adjust the volume.
There is no sound when you select
the audio in function.
ˎ
Adjust the volume on the
connected equipment.
ˎ
Try turning off the system, then
turning it back on again.
“PARTY” and “CHAIN” are flashing
on the display.
ˎ
The audio in function is selected
in the Party Chain function. Press
FU/– repeatedly to select
other function.
ˎ
Try turning off the system, then
turning it back on again.
Resetting the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the subwoofer to
perform this operation.
1
Unplug the power cord, and then
plug it back in.
2
Press

to turn on the system.
3
Hold down FUNCTION and

at
the same time until “RESET”
appears on the display.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory default
setting.