Sony HT-DDW885, Руководство по эксплуатации

Страница: 72 / 76

72 GB
Specifications
Amplifier section
Models of area code SP, AU, E51
Stereo mode (6 ohms, 1 kHz, THD 1%)
90 W + 90 W
1)
Surround mode
2)
(reference) (6 ohms, 1 kHz,
THD 10%)
RMS output
FRONT: 135 W
per channel
1)
CENTER:135 W
1)
SURROUND: 135 W
per channel
1)
SURROUND BACK:
135 W
1)
Models of area code AR
Stereo mode (6 ohms, 1 kHz, THD 1%)
90 W + 90 W
1)
80 W + 80 W
3)
Surround mode
2)
(reference) (6 ohms, 1 kHz,
THD 10%)
RMS output
FRONT:
135 W per channel
1)
,
125 W per channel
3)
CENTER:
135 W
1)
, 125 W
3)
SURROUND:
135 W per channel
1)
,
125 W per channel
3)
SURROUND BACK:
135 W
1)
, 125 W
3)
1)
Measured under the following conditions:
2)
Reference power output for front, center, surround
and surround back speakers. Depending on the
sound field settings and the source, there may be
no sound output.
3)
Measured under the following conditions:
220 V AC, 50 Hz
Inputs
Analog Sensitivity: 800 mV/
50 kohms
Digital (Coaxial) Impedance: 75 ohms
Outputs (Analog)
AUDIO OUT Voltage: 800 mV/
10 kohms
SUB WOOFER Voltage: 2 V/1 kohm
Tone
Gain levels ±6 dB, 1 dB step
Reproduction frequency range:
28 – 20,000 Hz
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Models of area code SP, AU
With 9-kHz tuning scale:
531 – 1,602 kHz
Models of area code E51
With 10-kHz tuning scale:
530 – 1,610 kHz
4)
With 9-kHz tuning scale:
531 – 1,602 kHz
4)
Models of area code AR
With 10-kHz tuning scale:
530 – 1,610 kHz
Antenna Loop antenna
Intermediate frequency
450 kHz
4)
You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. While holding down TUNING
MODE, press
?/1 . All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the
procedure.
Area code Power requirements
SP, AR 230 V AC, 50 Hz
AU, E51 240 V AC, 50 Hz