background image

34

GB

Adjusting the level

(LEVEL menu)

 

You can use the LEVEL menu to adjust the 
balance and level of each speaker. These 
settings are applied to all sound fields.
Select “1-LEVEL” in the amplifier menus. For 
details on adjusting the parameters, see 
“Navigating through menus” (page 31) and 
“Overview of the menus” (page 32).

LEVEL menu parameters

x

T. TONE (Test tone)

Lets you adjust the speaker levels and balance 
while listening to the test tone from your 
listening position. For details, see “7: 
Adjusting the speaker levels and balance 
(TEST TONE)” (page 26).

x

FRT BAL (Front speaker 
balance)

Lets you adjust the balance between front left 
and right speakers.

x

CNT LVL (Center speaker level)

x

SL LVL (Surround left speaker 
level)

x

SR LVL (Surround right speaker 
level)

x

SW LVL (Sub woofer level)

x

D. RANGE (Dynamic range 
compressor)

Lets you compress the dynamic range of the 
sound track. This may be useful when you 
want to watch movies at low volumes late at 
night. Dynamic range compression is possible 
with Dolby Digital sources only.
• COMP. OFF

The dynamic range is not compressed.

• COMP.  STD

The dynamic range is compressed as 

intended by the recording engineer.

• COMP.  MAX

The dynamic range is compressed 

dramatically.

Tip

Dynamic range compressor lets you compress the 
dynamic range of the soundtrack based on the 
dynamic range information included in the Dolby 
Digital signal. “COMP. STD” is the standard 
setting, but it only enacts light compression. 
Therefore, we recommend using the “COMP. 
MAX” setting. This greatly compresses the dynamic 
range and lets you view movies late at night at low 
volumes. Unlike analog limiters, the levels are 
predetermined and provide a very natural 
compression.

Содержание HT-DDW685

































































Отзывы: