32
GB
C:\Documents and
Settings\pc13\Desktop\JC060815_2662266612DDW1500_GBES\2662266612\01GB03CON_HT-
DDW1500-AR.fm
masterpage: Left
HT-DDW1500
2-662-266-
61
(2)
6: Selecting the speaker
Be sure to use the buttons on the receiver for
this operation.
Press SPEAKERS (ON/OFF) to turn
on the speakers and sub woofers.
To turn off the speaker output, press
SPEAKERS (ON/OFF) again until the “SP”
indicators on the display do not light up.
7: Calibrating the
appropriate settings
automatically
(AUTO CALIBRATION)
This receiver is equipped with D.C.A.C.
(Digital Cinema Auto Calibration)
Technology which allows you to perform
Automatic Calibration as follows:
• Check the connection between each speaker
and the receiver.
• Adjust the speaker level.
• Measure the distance of each speaker to your
listening position.
You can also adjust the speaker levels and
balance manually. For details, see
“8: Adjusting the speaker levels and balance
(TEST TONE)” (page 35).
1
Connect the supplied ECM-AC2
optimizer microphone to the
AUTO CAL MIC jack.
2
Place the optimizer
microphone at your listening
position.
3
Place the speakers so that the
speakers are facing the
optimizer microphone.
To select
Light up
The speakers connected to the
SPEAKERS terminals.
SP
?/1
AUTO CAL MIC
SPEAKERS
(ON/OFF)
PHONES
VIDEO 3 IN/PORTABLE AV IN
VIDEO
L AUDIO R
MEMORY/
ENTER
TUNING
MODE
TUNING
2CH
A.F.D.
MOVIE
MUSIC
MULTI CH IN
MUTING
DISPLAY
MULTI CHANNEL DECODING
INPUT MODE
INPUT SELECTOR
MASTER VOLUME
SPEAKERS
(ON/OFF)
Before you perform Auto
Calibration
?/1
AUTO CAL MIC
SPEAKERS
(ON/OFF)
PHONES
VIDEO 3 IN/PORTABLE AV IN
VIDEO
L AUDIO R
MEMORY/
ENTER
TUNING
MODE
TUNING
2CH
A.F.D.
MOVIE
MUSIC
MULTI CH IN
MUTING
DISPLAY
MULTI CHANNEL DECODING
INPUT MODE
INPUT SELECTOR
MASTER VOLUME
1
01GB01COV_HT-DDW1500-AR.book Page 32 Tuesday, May 23, 2006 6:27 PM