Sony HT-CT380, Руководство по эксплуатации

Страница: 14 / 166

14
GB
Using the setup display
You can set the following items with the menu.
Your settings are retained even if you disconnect the AC power cord (mains lead).
1
Press MENU to turn on the menu on the front panel display.
2
Press BACK/
 
(select)/ENTER repeatedly to select the item and press ENTER
to decide the setting.
3
Press MENU to turn off the menu.
The default settings are underlined.
Settings and Adjustments
Menu list
Menu items Function
[LEVEL]
(Level) [DRC]
(Dynamic range
control) Useful for enjoying movies at low sound volume. DRC
applies to Dolby Digital sources.
• [ON]: Compresses sound in accordance with the
information contained in the content.
• [AUTO]: Automatically compresses sound encoded in
Dolby TrueHD.
• [OFF]: Sound is not compressed.
[TONE]
(Tone) [BASS]
(Bass) Adjusts the bass level.
• The parameters range from [–6] to [+6] in 1-step
increments.
[TREBLE]
(Treble) Adjusts the treble level.
• The parameters range from [–6] to [+6] in 1-step
increments.
[AUDIO]
(Audio) [SYNC] (AV sync) You can adjust the sound when the image and the sound
are not in sync.
• [ON]: Turns on the AV Sync function.
• [OFF]: Turns off the AV Sync function.
[DUAL]
(Dual mono) You can enjoy multiplex broadcast sound when the system
receives a Dolby Digital multiplex broadcast signal.
• [M/S]: Main sound is output from the left speaker and sub
sound is output from the right speaker.
• [MAIN]: Outputs only the main channel.
• [SUB]: Outputs only the sub channel.
[EFFECT]
(Sound effect) • [ON]: The sound of the selected sound field is played. It is
recommended to use this setting.
• [OFF]: The input source is down-mixed for 2 channels.
• Even if [EFFECT] is set to [OFF], [EFFECT] is automatically set
to [ON] when you change the sound field setting.
Note