Specifications
HSR-X200
HSR-X200/16
HSR-X216/32
General
Weight
5.5 kg (12 lb 2 oz)
7.0 kg (15 lb 7 oz)
Dimensions (W x H x D)
420 x 96 x 376 mm (16
5
/
8
x 3
7
/
8
x 14
7
/
8
inches)
Power requirements
AC 120 V ±10%, 60 Hz ±10%:
Power consumption
30 W
38 W
Operating temperature
5 to 40 ˚C (41 to 104 ˚F)
Operating humidity
Less than 80%
Built-in HDD capacity
80 or 160 GB
160 GB
320 GB
with the HSBK-X201
160 or 240 GB
NA
NA
with the HSBK-X201/16
240 or 320 GB
240 GB
NA
Video
Input
1 channel, VBS, VS (BNC), 1.0 Vp-p,75
Ω
, unbalanced
16 channels, VBS, VS (BNC), 1.0 Vp-p,75
Ω
, unbalanced
1 channel, S-VIDEO (Mini DIN 4-pin)
Loop-out connector: BNC (1)/S-VIDEO (1)
Output
1 channel, VBS, VS (BNC), 1.0 Vp-p,75
Ω
, unbalanced
16 channels, VBS, VS (BNC), 1.0 Vp-p,75
Ω
, unbalanced
1 channel, S-VIDEO (Mini DIN 4-pin)
Monitor output
—
2 channels, VBS, VS (BNC), 1.0 Vp-p, 75
Ω
, unbalanced
1 channel, S-VIDEO (Mini DIN 4-pin)
Video compression
Motion-JPEG
Picture quality mode
Hyper
52 KB/picture
Super
44 KB/picture
High
32 KB/picture
Mid
24 KB/picture
Low
17 KB/picture
Picture resolution
720 x 240 pixels (Field mode)
720 x 288 pixels (Field mode)
720 x 480 pixels (Frame mode)
720 x 240 pixels (Field mode)
Horizontal resolution
More than 500 TV lines (Hyper mode)
Signal-to-noise ratio
48 dB (typical, Hyper mode)
Audio
MIC input
1 channel Monaural (Mini jack), -60 dBs, 10 k
Ω
, unbalanced
Line input
1 channel Monaural (Phono Jack), -8 dBs, 27 k
Ω
, unbalanced
Line output
1 channel Monaural (Phono Jack), -8 dBs, 600
Ω
, unbalanced
Signal-to-noise ratio
40 dB (typical)
Distortion
Less than 4% at 1 kHz
Alarm and control input/output
RS-232C:
D-sub 9-pin
RS-232C:
D-sub 9-pin
RS-485 (A, B, GND): Push-lock terminals
RS-485 (A, B):
RJ-11
Alarm in:
Normal open (Low active)
Alarm in:
Normal open (Low active), x16
Alarm reset in:
Normal open (Low active)
Sensor alarm out: 5 V, 5.7 k
Ω
(Low active), x16
Alarm out:
5 V, 5.7 k
Ω
(Low active)
R1/R2:
Push-lock terminal
Non rec out:
5 V, 5.7 k
Ω
(Low active)
All:
5 V, 5.7 k
Ω
(Low active)
Clock set out:
5 V, 5.7 k
Ω
(Low active)
Alarm out:
5 V, 5.7 k
Ω
(Low active)
Clock set in:
Normal open (Low active)
Alarm reset out: Normal open (Low active)
Warning out:
5 V, 5.7 k
Ω
(Low active)
Non rec out:
5 V, 5.7 k
Ω
(Low active)
Disk full out:
5 V, 5.7 k
Ω
(Low active)
Warning out:
5 V, 5.7 k
Ω
(Low active)
Alarm full out:
5 V, 5.7 k
Ω
(Low active)
Disk full out:
5 V, 5.7 k
Ω
(Low active)
Remote control input: Push-lock terminals
Alarm full out:
5 V, 5.7 k
Ω
(Low active)
Series out:
5 V, 5.7 k
Ω
(Low active)
Series in:
Low level
Switch out:
5 V, 4.8 k
Ω
(Low active)
Supplied accessories
AC power cord (1), Power cord tie (1), Rack mount kit (1), Operation manual (1)
Optional accessories
HSBK-X201 80 GB HDD (HSR-X200 only)
HSBK-X201/16 160 GB HDD (HSR-X200/16 only)
MSA-8A/16A/32A/64A/128A Memory Stick
MSX-256/512/1G Memory Stick PRO
MSAC-PC2 Memory Stick Adaptor
MSAC-PC3 Memory Stick/Memory Stick PRO Adaptor
S-HSR-XFamily
MK10019V1TC03MAR
Printed in USA 5/03
Sony Electronics Inc.
One Sony Drive
Park Ridge, NJ 07656
www.sony.com/security
201-358-4954
©2003 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Design, features and specifications are subject to change without notice.
All non-metric weights and measures are approximates.
Sony, Memory Stick and Memory Stick PRO are trademarks of Sony Corporation.