Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
sony.com/professional
V-2582 (MK11061V1)
Printed in USA (9/13)
Specifications
©2013 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
“SONY”, “Power HAD”, and “HDVS” are trademarks of Sony Corporation.
All other trademarks are the property of their respective owners.
HSCU-300R
HSCU-300RF
General
Power supply
AC 100 V to 240 V, 50/60 Hz
Operating temperature
41°F to 104°F (5°C to 40°C)
Storage temperature
-4°F to +140°F (-20°C to +60°C)
Weight
17 lb 7 oz (7.9 kg)
14 lb 12 oz (6.7 kg)
Input/output connectors
Camera
Triax (x1)
Fiber (x1)
Intercom/Tally/PGM
D-sub 25-pin, female (x1)
• Intercom (PROD/ENG), 4W/RTS/CC, 0 dBu
• Tally (R, G)
• PGM 2 systems, -20/0/+4 dBu
Remote
8-pin multi-connector (x1)
Trunk / Mic remote*
2
/ WF
remote*
2
/ WF mode
D-sub 25-pin, female (x1), Trunk : RS-422A 1 system
LAN
RJ-45 (x1), 10BASE-T, 100BASE-TX
Input connectors
AC input
AC 100 V to 240 V
Serial return input
BNC (x2)
HD-SDI : SMPTE 292M, 0.8 Vp-p, 75 Ω, 1.485/1.4835 Gbps
SD-SDI : SMPTE 259M, 270 Mbps
HD-SDI/SD-SDI selectable
VBS return input
BNC (x2)
VBS: 1.0 Vp-p, 75 Ω
Reference input
BNC (x1) with loop-through output BNC (x1)
HD : SMPTE 274M, tri-level sync, 0.6 Vp-p, 75 Ω
SD : Black burst (NTSC: 0.286 Vp-p, 75 Ω; PAL: 0.3 Vp-p, 75 Ω)
Prompter input
BNC (x2), VBS signal, 1.0 Vp-p, 75 Ω, 2 ch
Output connectors
Mic output
XLR 3-pin, male (2), 0/-20 dBu
HD-SDI/SD-SDI output
BNC (x2)
HD-SDI : SMTPE 292M, 0.8 Vp-p, 75 Ω, 1.485/1.4835 Gbps
SD-SDI : SMPTE 259M, 0.8 Vp-p, 75 Ω, 270 Mbps
HD-SDI/SD-SDI selectable
HD-SDI/SD-SDI monitor output
BNC (x2)
HD-SDI : SMTPE 292M, 0.8 Vp-p, 75 Ω, 1.485/1.4835 Gbps
SD-SDI : SMPTE 259M, 0.8 Vp-p, 75 Ω, 270 Mbps
HD-SDI/SD-SDI selectable
Pr/R/R-Y, Y/G/Y, Pb/B/B-Y
HD Component video: Y (100% white): 0.7 Vp-p,
Pr/Pb (75% color bar): 0.7 Vp-p, 75 Ω
HD RGB video R/G/B (100% white): 0.7 Vp-p, 75 Ω
SD Component video: Y (100% white): 0.714 Vp-p,
Pr/Pb (75% color bar): 0.756 Vp-p, 75 Ω
SD RGB video R/G/B (100% white): 0.7 Vp-p, 75 Ω
VBS output
BNC (x2), VBS 1.0 Vp-p, 75 Ω
PIX output
BNC (x1), VBS/R/G/B (VBS 1.0 Vp-p, 75 Ω)
Sync/WF output*
2
BNC (x1),
Sync output:
HD: BTA-S001A, tri-level sync, 0.6 Vp-p, 75 Ω
SD: composite sync, 0.3 Vp-p, 75 Ω
HD sync/SD sync selectable
WF output:
VBS/SEQ/R/G/B (VBS 1.0 Vp-p, 75 Ω)
Supplied accessories
Number plates (1 set), Operation manual (1)
*2 Selectable
HSC-300R
HSC-300RF
HSC-100R
HSC-100RF
General
Power requirements
DC 180 V, 1.0 A (max.), DC 12 V, 7 A (max.)
Operating temperature
-4°F to +113°F (-20°C to +45°C)
Storage temperature
-4°F to +113°F (-20°C to +45°C)
Weight
9 lb 15 oz (4.5 kg)
9 lb 10 oz (4.1 kg)
9 lb 15 oz (4.5 kg)
9 lb 10 oz (4.1 kg)
Camera
Pickup device
3-chip 2/3-inch type CCD
Effective picture elements (H x V)
1920 x 1080
Signal format
1080/50i, 59.94i, 720/50p, 59.94p, 1080/25PsF*
1
, 29.97PsF*
1
Spectrum system
F1.4 prism system
Lens mount
Sony bayonet mount
Built-in filters
CC A: CROSS, B: 3200 K, C: 4300 K, D: 6300 K
ND 1: CLEAR, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND
CC Electrical
ND 1: CLEAR, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND
Sensitivity
(at 2000 lx, 3200 K, 89.9% reflectance)
F10 (59.94 Hz) / F11 (50 Hz) at 2000 lx (3200 K, 89.9% reflectance)
F10 (59.94 Hz) / F11 (50 Hz) at 2000 lx (3200 K, 89.9% reflectance)
Signal-to-noise ratio (typical)
HD : -60 dB (1080i)
Horizontal resolution
HD : 1,000 TV lines
SD : 900 TV lines
Shutter speed selection
1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 (s) (59.94i mode)
1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 (s) (50i mode)
Modulation depth
HD : 45% at 27.5 MHz (1080i)
SD : 90% at 5 MHz
Input/output connectors
Audio input (CH1, CH2)
XLR 3-pin, female (x1 each)
For MIC: -60 dBu (may be selected to -20 dBu by menu or HSCU operations), balanced
For LINE: 0 dBu, balanced
Mic 1 input
XLR 3-pin, female (x1)
Return control input
6-pin (x1)
Prompter output/Genlock input/Return
input
BNC (x1), 1 Vp-p, 75 Ω
DC input
XLR 4-pin (x1), DC 10.5 V to 17 V
DC output
4-pin (x1), DC 10.5 V to 17 V, 0.5 A (max.)
Test output
BNC (x1)
SDI output
BNC (x1)
Earphone output
Stereo mini jack (x1)
CCU
Triax (x1)
Fiber (x1)
Triax (x1)
Fiber (x1)
Tracker
10-pin (x1)
Intercom
XLR 5-pin, female (x1)
Remote
8-pin (x1)
Lens
12-pin (x1)
Viewfinder
20-pin (x1)
Supplied accessories
Operating instruction (1), Cable clamp belt (1), Switch label (1)
Operating instruction (1), Cable clamp belt (1), Switch label (1),
Warranty booklet (1)
*1 An optional software HZC-PSF3 is required.
Camera Control Unit
HD/SD System Camera
