background image

24

24p True Cinema

On:

 Displays 24 fps video faithfully at 24 fps. Cinematic 

content of this kind is available on Blu-ray disc. Provides 
a viewing experience similar to that in theaters.

Off:

 Deactivates this function. 24 fps video signals are 

displayed after upconversion to 60 fps.

• Activating this function when “Panel Drive Mode” is set to “Clear” 

may make the screen appear to flicker (depending on the source 
signal), which may be distracting. In this case, either deactivate this 
function or set “Panel Drive Mode” to “Normal.”

Wide Mode

Not available during 3D 
playback.

Normal:

 Displays the images at the original 4:3 aspect ratio.

Full:

 Displays 4:3 content in full-screen, stretching the images 

horizontally. 16:9 content is also displayed full-screen, at 
the original aspect ratio.

Zoom:

 Enlarges the images vertically and horizontally, 

preserving the original aspect ratio.

• “Normal” is not available with HD input sources (1080i, 720p, or 

1080p).

Overscan

Not available during 3D 
playback.

Adjusts the display area.

Auto:

 Automatically adjusts the picture to the optimal display 

area.

On:

 Hides image edges. Select in case of issues such as noise at 

images edges.

Off:

 Displays the entire image.

Note

Note

Содержание HMZ-T2









































Отзывы: