Sony HKSR-9003, Руководство по эксплуатации

Страница: 62 / 177

Viewing Settings and Indications in the Viewfinder 62
Chap
ter
3
Ba
s
ic
Ad
jus
tme
nt
s
an
d Set
tings
1) These items can also be set on the <CHAR/MARK
MIX> page.
You can display cursors on the viewfinder and
monitor screens.
Activating/deactivating cursor display on
each output
The <CHAR/MARK MIX> page of the Camera
>USER (OPERATION) menu allows you to
activate and deactivate the display of cursors on
each output.
The display of cursors (CURSOR) is set to OFF
for all outputs when the unit is shipped from the
factory.
Selecting the type and size of the cursor
The <MARKER SETTING> page allows you to
select the type and size of the cursor.
The cursor will appear on an output if cursor
display for that output has been activated on the
<CHAR/MARK MIX> page.
Item Function
VF
1) Turn the zebra pattern in the
viewfinder on and off.
MONITOR
1) Turn the zebra pattern on the
monitors connected to the HD SDI
MON1 or HD SDI MON2
connector on and off.
HD-Y
1) Turn the zebra pattern on the
monitor on and off.
VBS
1) Turn the zebra pattern on a device
connected via the REMOTE
connector on and off.
ZEBRA
TYPE Select the zebra type to be
displayed: 1, 2, or 1&2
ZEBRA1
LEVEL Adjust the level (0 to 109%) of the
zebra 1 indication (factory setting:
70%).
WIDTH Adjust the width (0 to 30%) of the
zebra 1 indication (factory setting:
70%).
ZEBRA2 Adjust the level (50 to 109%) of
the zebra 2 indication (factory
setting: 100%).
Specifying and Displaying
Cursors
<ZEBRA> page
Item Function
VF Turn the display of cursors on the
viewfinder on and off.
HD-Y Turn the display of cursors on the
monitor on and off.
MON Turn the display of cursors on the
monitors connected to the HD SDI
MON1 or HD SDI MON2 connector
on and off.
Example: Box cursor
<CHAR/MARK MIX> page