Sony HKSR-9003, Руководство по эксплуатации

Страница: 159 / 177

Warning/Error Messages 159
Ap
pend
ix
es
If one of the conditions described in the table of
warning messages
(see page 159) is detected, a
warning message code appears in the operation
status and warnings section of the control panel
display
(see page 24) . This section is visible when
the display is showing the HOME screen.
Note
Warning messages do not appear unless the display is
showing the HOME screen. To display the HOME
screen, press the HOME button on the control panel.
To check the content of warning messages
Press the SELECT/ENTER dial on the control
panel. A popup window appears to display
messages for the current warnings.
Only one message is displayed at one time, even
if multiple warnings occur. But the number of
current warnings appears at the bottom of the
popup window.
When a warning message appears
Take any action that may be needed to eliminate
the cause of the warning.
Warning messages
0068 SLACK-20 Capstan drive voltage
error was detected.
0069 SLACK-21 Capstan FG error was
detected.
006B SLACK-23 Capstan rotation
direction error was
detected.
006C SLACK-24 Capstan speed error was
detected.
006D SLACK-100 Tension error was
detected during rewind.
0071 SLACK-61 Function cam forward
rotation time-out error
was detected.
0072 SLACK-62 Function cam reverse
rotation time-out error
was detected.
0073 SLACK-63 Tape top detection time-
out error was detected.
0074 SLACK-64 Full top detection time-
out error was detected.
0075 SLACK-65 Tape end detection
time-out error was
detected.
0076 SLACK-66 Cassette ejection error
was detected.
0077 F-TOP SENSOR
ERR FULL TOP sensor error
was detected.
(Exchange the sensor.)
0078 SLACK-32 S-reel FG error was
detected.
0079 SLACK-42 T-reel FG error was
detected.
007A SLACK-33 S-reel direction error
was detected.
007C SLACK-34 S-reel speed error was
detected.
007D SLACK-44 T-reel speed error was
detected.
007F HUMID ERROR Condensation detector
detected condensation.
About Warning Messages
Code Message Description
Code Message Description
0001 PB FREQ
MISMATCH System frequency of
this system does not
match system
frequency on the
tape.
0004 NO PB LTC Playback LTC cannot
be detected.
0005 NO PB VITC Playback VITC
cannot be detected.
Example:
Popup window displaying warning message
“VTR: 0010 TELEFILE FULL”
There is no current error
(see page 157) .
There are three current warnings.
To view the other messages, turn the
SELECT/ENTER dial on the control
panel.