Chapter
74
6-1 Timer Rec
6
Memory Recording (With
HKSR-102 Installed)
You can use the memory on the optional HKSR-102 Video
Capture Board to perform the following kinds of recording
while maintaining the high quality of the HDCAM-SR
(1920 × 1080) format.
• SR Motion: Provides slow and quick motion effects.
• Timer Rec: Captures and records images at specified
intervals.
• Cache Rec: Allows you to record video and audio from
a few seconds before the time when you press the
recording start button (in standby on mode).
When installing the HKSR-102 in this unit, refer to the
HKSR-102 Installation Manual.
For details on SR Motion, see Chapter 7 “SR Motion (With
HKSR-102 Installed)” (page 78).
6-1 Timer Rec
The Timer Rec function allows you to use the memory of
the optional HKSR-102 board to capture and record
images at specified intervals. It is comparable to the
Interval Rec function of previous models, but enables
time-lapse recording and recording over longer periods.
The following two methods are available.
Manual Timer Rec:
Specifies the number of frames to
record in a single take. Each time that recording starts,
the specified number of frames are captured
continuously.
Auto Timer Rec:
Specifies the number of frames to
record in a single take and the interval (seconds)
between takes. Each time that recording starts after the
specified interval, the specified number of frames are
captured continuously.
The following formats can be recorded by Timer Rec.
1080 422:
23.98/24/25/29.97PsF, 50P, 59.94P
1080 444SQ/444HQ/422x2:
23.98/24/25/29.97PsF
Note
Timer Rec cannot be used at the same time as Cache Rec.
6-1-1 Manual Timer Rec
Note
Set SELECT FPS in the SYSTEM Setup menu to “OFF”.
1
In the SYSTEM Setup menu, set EDIT >TIMER REC
to “MANU”.
2
In the submenu window, select “Manu Frm” and then
press the SELECT/ENTER dial.
A setting window opens.
Содержание HKSR-101
Страница 126: ...Index 126 Index ...
