Sony HKSR-101, Руководство по эксплуатации, Страница: 52 / 128

Chapt
er
4
Me
n
u
S
e
tti
ngs
52
4-4 AUDIO Setup Menu
4-4 AUDIO Setup Menu
The AUDIO Setup menu allows you to make settings
related to audio signals.
In the Settings column of the following table: • Factory default settings are underlined.
• Square brackets indicate settings as displayed in setting
windows (see the figure for step
3
on page 62) .
Item Settings
INPUT SEL
Input signal selection TRACK1 Selects the signal to assign to track 1.
SDI1 [SDI CH1] to SDI12 [SDI CH12], ANA1 [Analog CH1] to ANA4 [Analog CH4], A/
E7 [AES/EBU CH7] to A/E10 [AES/EBU CH10]
TRACK2 Selects the signal to assign to track 2.
Same settings as TRACK1 (SDI2)
TRACK3 Selects the signal to assign to track 3.
Same settings as TRACK1 (SDI3)
TRACK4 Selects the signal to assign to track 4.
Same settings as TRACK1 (SDI4)
TRACK5 Selects the signal to assign to track 5.
Same settings as TRACK1 (SDI5)
TRACK6 Selects the signal to assign to track 6.
Same settings as TRACK1 (SDI6)
TRACK7 Selects the signal to assign to track 7.
Same settings as TRACK1 (SDI7)
TRACK8 Selects the signal to assign to track 8.
Same settings as TRACK1 (SDI8)
TRACK9 Selects the signal to assign to track 9.
Same settings as TRACK1 (SDI9)
TRACK10 Selects the signal to assign to track 10.
Same settings as TRACK1 (SDI10)
TRACK11 Selects the signal to assign to track 11.
Same settings as TRACK1 (SDI11)
TRACK12 Selects the signal to assign to track 12.
Same settings as TRACK1 (SDI12)
PHONE SEL Selects the audio signals output to the EARPHONES jack and MONITOR OUT L and
R connectors.
MIX MODE Selects the method of mixing audio signals output to the EARPHONES jack and the
MONITOR OUT L/R connectors.
ADD [Add]: Simple addition
RMS [RMS]: Multiplied average (root mean square)
AVG [Average]: Simple average
REC LEVEL Adjusts the audio recording level (see page 67) . (This adjustment is impossible during
playback.)
PB LEVEL Adjusts the audio playback level (see page 72) . (This adjustment is impossible during
recording.)
METER TYPE Sets the audio level meter display range.
PEAK [Full Peak]: Display 0 dBFS as the peak value.
REF [Full Ref]: Display the reference level (+4 dBu) as 0 dB.
FINE [Fine]: Display a scale with 0.25 dB steps centered around –20 dB.
PEAK HOLD Selects whether to use the peak hold function.
ON [On]: Use.
OFF [Off]: Do not use.