21 (E)
HKSP-1125
6. Error/Warning
In this unit, the operations below are performed when an error or warning occurs.
.
The output signal at pin 4 (BOARD ERROR OUT) or pin 5 (BOARD WARNING OUT) of the
STATUS OUT connector on the connector panel of signal processing unit PFV-SP series becomes
active.
.
The STATUS indicator on the operation panel blinks in red (error) or blinks in green (warning).
.
A code appears on the lower display of the operation panel.
6-1. Error/Warning Code List
6-1-1. Error
Error code
Contents of error
- - -
No error exists.
1-01
Internal hardware failure (SYS I/F bus connection check at the time of starting)
1-02
Spare
2-01
A connector board (DIF board) is not installed.
2-02
A connector board of the different model is installed.
2-10
Hardware and software are not combined properly.
6-1-2. Warning
Warning code
Contents of warning
- - -
No warning exists.
1-01
No reference signal input exists.
1-02
Not locks to the reference signal.
2-01
No SD video input signal exists.
2-02
The format of SD video input signal does not match with the setting of format.
2-03
A SD video input signal is abnormal.
2-04
Audio signal input is abnormal.
Содержание HKSP-1125
Страница 2: ......
