Sony HKC-7080, Руководство по установке и обслуживанию

Страница: 31 / 92

3-9 (E)
HKC-7080
Page Ver. Item Settings Contents
Detail 2 Detail
[On]
, Off Turns on and off the function to improve resolution by adding
the detail signal
W.Limiter _ 99 to 99 (
[0]
) Adjusts the clipping level against the higher detail signal at the
maximum level
B.Limiter
_
99 to 99 (
[0]
) Adjusts the clipping level against the lower detail signal at the
minimum level
K.AP.Gain _ 99 to 99 (
[50]
) Adjusts the knee aperture gain
Knee APERT
_
99 to 99 (
[0]
) Adjusts the knee aperture level
Knee APERT On,
[Off]
Turns the knee aperture function on and off
Clear Throw MENU SELECT Resets numeric settings on the Detail 2 page to 0
switch to ENTER to execute (When you throw MENU SELECT switch to ENTER, the “Clear”
indication flashes. Throw MENU SELECT switch to ENTER
again to execute; throw to CANCEL to cancel)
Skin Detail Skin Detail On,
[Off]
Turns the skin detail function on and off
Level _ 99 to 99 (
[0]
) Adjusts the level of the skin detail
Phase 0 to 359 (DEG) (
[0]
) Adjusts the hue for the skin detail function
Width 0 to 90 (DEG) (
[0]
) Adjusts the color width for the skin detail function
Saturation
_
99 to 99 (
[0]
) Adjusts the color saturation for the skin detail function
Gate On,
[Off]
Turns on and off the area display for the skin detail on the
viewfinder screen
Clear Throw MENU SELECT Resets numeric settings on the Skin Detail page to 0
switch to ENTER to execute (When you throw MENU SELECT switch to ENTER, the “Clear”
indication flashes. Throw MENU SELECT switch to ENTER
again to execute; throw to CANCEL to cancel)
Matrix R-G, R-B _ 99 to 99 (
[0]
) Sets an optional value as the constant of the liner matrix for
G-R, G-B _ 99 to 99 (
[0]
) R-G, R-B, G-R, G-B, B-R and B-G
B-R, B-G
_
99 to 99 (
[0]
) (Compensates the user’s matrix )
Matrix On,
[Off]
Turns the matrix compensation on and off
User MTX On,
[Off]
Turns the user’s matrix compensation on and off
Preset MTX
[On]
, Off Turns the preset linear matrix (fixed constant compensation) on
and off
PRE MTX SEL
[SMPTE-240M]
Selects the preset linear matrix (fixed constant compensation)
REC-709
SMPTE-WIDE
NTSC
EBU
Test
[Off]
, 1, 2 Selects the TEST signal
Off: No test signal is output
1:
Outputs the sawtooth waveform test signal
2: Outputs the 3-step waveform test signal
Clear Throw MENU SELECT Resets numeric settings on the Matrix page to 0
switch to ENTER to execute (When you throw MENU SELECT switch to ENTER, the “Clear”
indication flashes. Throw MENU SELECT switch to ENTER
again to execute; throw to CANCEL to cancel)
3-1. Setup Menu
3-1-2. Paint Menu