background image

16

Using the CD-ROM Manual

  Chapt

er 1   

O

v

er

v

ie

w

1-4 Using the CD-ROM 
Manual

The supplied CD-ROM includes versions of the Operation 
Manual for the HDW-790/790P in English and the HDW-
790 in Japanese in PDF format.

1-4-1 Preparations

The following program must be installed on your computer 
in order to read the operation manuals contained on the 
CD-ROM.

• Adobe Reader Version 6.0 or higher

If Adobe Reader is not installed, you can download it from 
the following URL:

http://www.adobe.com/

Adobe and Adobe Reader are trademarks of Adobe Systems Incorporated in 
the United States and/or other countries.

1-4-2 Reading the CD-ROM Manual

To read the operation manual contained on the CD-ROM, 
do the following.

1

Insert the CD-ROM in your CD-ROM drive.

A cover page appears automatically in your browser.
If it does not appear automatically in the browser, 
double-click on the index.htm file on the CD-ROM.

2

Select and click on the operation manual that you 

want 

to read.

This opens the PDF file of the operation manual.

The files may not be displayed properly, depending on the 
version of Adobe Reader. In such a case, install the latest 
version you can download from the URL mentioned in 

“1-

4-1 Preparations”

 above.

If you have lost or damaged the CD-ROM, you can 
purchase a new one to replace it. Contact your Sony 
service representative.

Memo

Memo

Note

Содержание HDW-790

















































































































































































Отзывы: