Sony HDR-AX2000 - Avchd Flash Media Handycam Camcorder Скачать руководство пользователя страница 83

Страница: 83 / 132

Tro
ubl
es
hoo

ting

Troubleshooting

If you run into any problems using your camcorder, follow the flow chart below.

• Power sources/LCD screen/Wireless Remote Commander···p. 83
• Memory card···p. 85
• Recording···p. 86
• Playback···p. 89
• Connecting to TV···p. 90
• Dubbing/Editing/Connecting to other devices···p. 91
• Connecting to a computer···p. 91

The power does not turn on or abruptly turns off.

• Attach a charged battery pack to the camcorder (p. 17).
• Use the AC Adaptor to connect to a wall outlet (wall socket) (p. 17).

The camcorder does not operate even when the power is set to on.

• Disconnect the AC Adaptor from the wall outlet (wall socket) or remove the battery pack,

then reconnect it after about 1 minute.

• Press the RESET button (p. 112) using a sharp-pointed object.

The camcorder gets warm.

• The camcorder may get warmer while you use it. This is not a malfunction.

The CHG lamp does not light up during charging the battery pack.

• Set the POWER switch of the camcorder to OFF (CHG) (p. 17).
• Attach the battery pack correctly (p. 17).
• Connect the power plug to the wall outlet (wall socket) correctly.
• The charging of the battery pack is completed (p. 17).

Check your camcorder, referring to the items on pages 83 t o 91.

Disconnect the power source, reconnect the power source after about 1 minute and turn
on your camcorder.

Press the RESET button (p. 112) with a pointed object, then turn on your camcorder.
This operation will reset the date, time and area settings.

Consult your Sony dealer or local authorized Sony service facility.

Power sources/LCD screen/Wireless Remote Commander

Continued

Содержание HDR-AX2000 - Avchd Flash Media Handycam Camcorder





































































































































Результаты поиска

Содержание HDR-AX2000 - Avchd Flash Media Handycam Camcorder

Отзывы:

Похожие инструкции для HDR-AX2000 - Avchd Flash Media Handycam Camcorder

Бренды по названию

Популярные бренды

Sony HDR-AX2000 - Avchd Flash Media Handycam Camcorder, Руководство по эксплуатации

Результаты поиска

Содержание HDR-AX2000 - Avchd Flash Media Handycam Camcorder

Отзывы:

Похожие инструкции для HDR-AX2000 - Avchd Flash Media Handycam Camcorder

Бренды по названию

Популярные бренды