Sony HDCU1000, Руководство по обслуживанию

Страница: 19 / 334

1-9 (E)
MM/HDCU1000 Series
1-6-6. HKCU1005
Front boards
DRX-5 board
Same as the DRX-5 board common to HDCU1000/1080/
1500.
HIF-26 board
The HIF-26 board has the co-axial connector for outputting
the HD/SD-SDI signals to external devices.
It outputs two systems of the main-line system HD/SD-
SDI signals sent from the DRX-5 board in the optional
slot, and outputs two systems of the monitor-system HD/
SD-SDI signals.
Rear board
VDA-64A board
The VDA-64A board outputs the SD analog signals (VBS,
PIX, and WFM signals) to external devices.
1-6-5. HKCU1003
In addition to the functions of the HKCU1001, the
HKCU1003 supports full functions including
COMPONENT_OUT, and SUB_REF.
Front board
EN-159B board
In addition to the functions of the EN-159A board, the EN-
159B board receives the 8:4:4 component digital signal
from the front side (DRX-5 board or EN-159A board), and
outputs the SD analog component signal. Also, it outputs
the panel display signals (analog R, G, B signals and V, H
timing signals) when the RM-B750 is installed to the front
side of the HDCU1500.
Other than that, the board is equipped with the synchro-
nous circuit of the sub reference signal, and the output of
the staircase signal for the WFM sequential display.
Rear boards
VDA-64A board
Same as the HKCU1001.
Insert this board to the rear side of the slot that has the EN-
159B board inserted in its front side. The VDA-64A and
64B boards cannot be inserted simultaneously.
VDA-64B board
The VDA-64B board is used to output the SD analog
signals (PIX, WFM signals), and to input or output
Frame_Reference to external devices.
Insert this board to the rear side of the slot that has the EN-
159B board inserted in its front side. The VDA-64A and
64B boards cannot be inserted simultaneously.
VDA-64C board
The VDA-64C board outputs the SD analog signals (VBS,
component signals) to external devices.
Insert this board into the slot next (signal downstream) to
the one whose front side has the EN-159B board. The front
side of the slot should not have any board inserted.