21
LEVEL:
Set the brightness level of the marking signal to
add.
PEAK COLOR:
Set the color added to the marking
indicator where the detected value exceeds a fixed
level.
THRESHOLD:
Set the threshold value for displaying
PEAK COLOR.
COLOR LEVEL:
Set the saturation of the color of the
PEAK COLOR indicator.
4
Turn the MENU SEL knob/ENTER button to display
the desired setting and press the MENU SEL knob/
ENTER button.
5
To finish the adjustment, set the DISPLAY switch to
OFF to exit Menu mode.
Setting the Camera
Outputs
You can specify video signals directly output from the camera,
with menu operations.
The MAIN (camera picture), RET (return video), or VF (the
same picture as that displayed on the viewfinder screen)
setting is common to SD-SDI and VBS. Different signals
cannot be output.
The menu pages used for the output settings have been
registered to the USER menu at the factory.
• <SYSTEM FORMAT>
• <TEST OUT>
• <SDI OUT>
Set the following menu items to the settings shown in the
table.
For details on menu operations and the USER menu, see
“Menu Operations” (page 24).
Outputting the signal being shot (camera
picture)
The same textual information as that displayed on the
viewfinder screen can be added to the output signal by setting
CHARACTER to “ON” on the <SDI OUT> or <TEST OUT>
page.
To output HD-SDI
To output SD-SDI
To output VBS
Constantly outputting a return video
• When a camera control unit is connected, one of the signals
being supplied to the camera control unit can be output from
the camera.
• The last selected return signal is output.
• The same textual information as that displayed on the
viewfinder screen can be added to the output signal by
Note
Menu page
Page No.
Item
Setting
<SDI OUT>
M11
SDI-MONI OUT
MAIN
Menu page
Page No.
Item
Setting
<SDI OUT>
M11
SDI-MONI OUT
SD-SDI
DOWN CONVERTER
SELECT
MAIN
Menu page
Page No.
Item
Setting
<TEST OUT>
M10
OUTPUT
VBS
DOWN CONVERTER
SELECT
MAIN
