14
Front left
a
NETWORK TRUNK connector (RJ-45 8-pin) (HDC2500/
2400)
Connects a device connected to the CCU’s NETWORK
TRUNK connector to the network.
b
RET 1 (return video 1) button
The return video 1 signal from the camera control unit is
monitored on the viewfinder screen while this button is
pressed. It function the same as the RET 1 buttons on the
handle (
) and that on the operation panel on the rear
of the camera (
).
You can also assign other functions to this button, using the
menu displayed on the viewfinder screen.
c
MIC 1 IN (microphone 1 input) connector (XLR 3-pin)
Connect a microphone.
This connector and the AUDIO IN CH-1 connector (
on the operation panel on the rear of the camera are
alternately activated with the CH1 audio input select switch
(
d
MIC (microphone) power switch
+48V:
To supply a power of +48 V to the connected
microphone.
OFF:
Not to supply a power to the connected microphone.
e
SHUTTER switch
For setting the electronic shutter functions when the camera is
used in standalone status without connecting a camera control
unit.
OFF:
The electronic shutter does not function.
ON:
The electronic shutter is activated.
SEL:
The shutter speed and shutter mode change each time
the switch is set to this position.
For details, see “Setting the Electronic Shutter” on page 26.
f
INTERCOM LEVEL control
To adjust the intercom/earphone volume level.
The intercom level adjustment is enabled when the
INTERCOM 1 and 2 LEVEL/MIC switches (on the SY-type
operation panel,
) or the LEVEL switch (on the
European-type operation panel,
) on the rear of the
camera are set to “FRONT.”
g
RET 2 (return video 2) button
When this button is pressed, the picture on the viewfinder
screen changes to the return video signal selected with the
RET 2 select switch (
) on the operation panel on
the rear of the camera.
You can also assign other functions to this button, using the
menu displayed on the viewfinder screen.
Rear
a
DC power supply out connector (2-pin)
Supplies power to an external device up to 2.5 A.
b
CAMERA POWER switch
CCU:
Power is supplied from the camera control unit.
EXT:
Power is supplied through the DC IN connector.
Note
For HDC2570 or optional HKC-TR27 installed
In standby mode, the intercom cannot be used.
c
Tally lamp and switch
ON:
The tally lamp lights when a tally signal is input to the
connected camera control unit or a call signal is
generated in response to pressing of a CALL button.
OFF:
The tally lamp is prevented from lighting.
d
CCU (Camera Control Unit) connector (optical/
electrical multi-connector) (HDC2500/2400)
Connect a camera control unit using an optical electro-
composite cable.
d
HDFX (HD Triax CCU) connector (Triax connector)
(HDC2570/2550)
Connect the HDC2570 to the HDFX200 HD Digital Triax CCU
Adaptor, or the HDC2550 to the HDFX100 HD Triax CCU
Adaptor, using Triax cable. A camera control unit can be
connected via the HDFX200/100.
HD
MULTI FORM
AT
S
ERIE
S
1
2
3
4
5
6
7
1
2
3
4
5
6
7
8
Operation panel
(
Shoulder strap fitting
post (
Connector panel
(
