84
Setting the Camera Outputs
The current shutter setting will be displayed in the
setting change/adjustment progress message display
area of the viewfinder screen for about three seconds.
Example: “Shutter: 1/250”
2
Push the SHUTTER switch to the SEL position again
before the display disappears. Repeat this action until
the desired mode or speed is displayed.
When all modes and speeds are displayed, they will be
displayed in the following order:
Setting the Camera
Outputs
You can specify video signals directly output from the
camera, with menu operations.
The MAIN (camera picture), RET (return video), or VF
(the same picture as that displayed on the viewfinder)
setting is common to SD SDI and VBS. Different signals
cannot be output.
The menu pages used for the output settings have been
registered to the USER menu at the factory.
• <POWER SAVE>
• <OUTPUT FORMAT>
• <TEST OUT>
• <SDI-2 OUT>(HDC1500)/<SDI OUT>(HDC1550/
1400/1450)
• <DOWN CONVERTER>
Set the following menu items to the settings shown in the
table.
For details on menu operations and the USER menu, see
“Menu Operations” on page 88.
Outputting the signal being shot (camera
picture)
The same character information as that displayed on the
viewfinder can be added to the output signal by setting
CHARACTER to “ON” on the <SDI-2 OUT> (<SDI
OUT>) or <TEST OUT> page.
To output as HD SDI
To output as SD SDI
1/100
1/2000
1/1000
1/500
1/250
1/125
Example: with 60i/59.94i
Standard mode
ECS mode
Note
Menu page
Item
Setting
<POWER SAVE>
SDI-2 OUT (HDC1500)/
SDI OUT(HDC1550/
1400/1450)
ACTIVE
<SDI-2 OUT> (HDC1500)
<SDI OUT> (HDC1550/
1400/1450)
OUTPUT
MAIN
Menu page
Item
Setting
<POWER SAVE>
SDI-2 OUT (HDC1500)/
SDI OUT(HDC1550/
1400/1450)
ACTIVE
DOWN CONVERTER
ACTIVE
Содержание HDC1400
Страница 63: ...118 Specifications ...
