manualshive.com logo in svg

Sony HDC-2000, Руководство по эксплуатации

Поделиться
Скачать
Sony HDC-2000 Скачать руководство пользователя страница 14

14

Attaching the 7.4-Type Viewfinder

For details on attaching a viewfinder, refer to the operating 
instructions supplied with the viewfinder.

Proceed as follows:

Notes

• Before attaching the viewfinder, be sure that the VF 

connector on the viewfinder mount is positioned at a right 
angle to the control panel of the camera as shown below.

• When attaching the viewfinder to the camera or removing it 

from the camera, be sure to lock the viewfinder in its 
standard position.

• When removing the viewfinder from the camera, be sure to 

secure the tripod with its tilt-lock mechanism and hold the 
viewfinder firmly.
Be careful not to fall or drop the viewfinder and camera.

For how to change the position of the viewfinder attached to 
the camera, refer to the operating instructions of the 
viewfinder.

1

Turn the panning base mounting plate of the camera 
fully to the right, as illustrated in the figure below.

2

Hold the viewfinder so that the projection of the 
panning base located at the bottom is positioned as 
illustrated and insert the mounting wedge of the 
viewfinder into the V-shaped recess of the camera's 
panning base mounting plate.

3

Press the base portion and insert the viewfinder fully 
into the panning base mounting plate.

Pull the handle and check to ensure that the viewfinder is 
securely locked.

4

Turn the viewfinder to a random position.

Note

Make sure that the viewfinder is securely locked. If the 
viewfinder is not properly attached to the camera, it may fall 
and cause injuries.

To remove the viewfinder

1

Return the viewfinder screen to the standard position.

2

Fix the viewfinder screen in the standard position by 
turning the tilt-lock knob and lift-lock knob in the 
direction of the arrow indicated on each knob (toward 
the lock position).

Bottom of the 
viewfinder

Viewfinder 
connector

V-shaped recess

Panning base mounting plate

Mounting 
wedge

Panning base

Projection

Pan-friction 
screw

Handle

Base portion

Standard position:

 The screen’s height and position are fixed fully 

back, as illustrated.

1

2

2

Tilt-lock knob

Lift-lock knob

Содержание HDC-2000






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды