Sony HCD-ZT4, Руководство по обслуживанию

Страница: 19 / 84

HCD-ZT4
19
CD REPEATS 5 LIMIT OFF MODE
The number of repeat for CD playback is 5 times when the repeat
mode is “REPEAT ALL”. This mode enables CD to repeat play-
back for limitless times.
Procedure:
1. Press [
?/1
] button to turn on the system.
2. Select CD function.
3. Press
[
x
] button, [CD] button and [DISC 1] button simultane-
ously to enter the CD repeat 5 limit off mode and the fl uores-
cent indicator tube displays “LIMIT OFF”.
4. To release from this mode, operate the cold reset. (Refer to the
“COLD RESET”)
CD SHIP MODE (WITH MEMORY CLEAR)
This mode moves the optical pick-up to the position durable to
vibration and clears all data including preset data stored in the EE-
PROM to initial conditions during the next AC-In. Use this mode
when returning the set to the customer after repair.
Procedure:
1. Press [
?/1
] button to turn on the system.
2. Select CD function.
3. Press
[
x
] button, [DISC 1] button and [
?/1
] button simultane-
ously. The system turns off automatically.
4. After the “STANDBY” blinking display fi nishes, a message
“MECHA LOCK” is displayed on the fl uorescent indicator
tube and the CD ship mode is set.
CD SHIP MODE (WITHOUT MEMORY CLEAR)
This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press [
?/1
] button to turn on the system.
2. Select CD function.
3. Press [DISC SKIP/EX-CHANGE] button and [
?/1
] button si-
multaneously. The system turns off automatically.
4. After the “STANDBY” blinking display fi nishes, a message
“MECHA LOCK” is displayed on the fl uorescent indicator
tube and the CD ship mode is set.
CD TRAY LOCK MODE
This mode let you lock the disc tray. When this mode is activated,
the disc tray will not open when [OPEN/CLOSE] button or [DISC
SKIP/EX-CHANGE] button is pressed. The message “LOCKED”
will be displayed on the
fl uorescent indicator tube.
Procedure:
1. Press [
?/1
] button to turn on the system.
2. Select CD function.
3. Press [
x
] button and [OPEN/CLOSE] button simultaneously
and hold down until “LOCKED” or “UNLOCKED” displayed
on the
fl uorescent indicator tube (around 5 seconds).
FACTORY PRESET
This mode is use to load all the factory use preset frequencies into
FM 1-FM 20 and AM 1-AM 10. Originally, frequency of FM 1-
FM 20 and AM 1-AM10 are set to the minimum frequency.
Procedure:
1. Press [
?/1
] button to turn on the system.
2. Press [TUNER/BAND] button, [
x
] button, and [DISC 1] but-
ton simultaneously and the message “FACTORY” appears
on the
fl uorescent indicator tube. The function is changed to
TUNER automatically.
4. To clear the error record, operate the cold reset. (Refer to the
“COLD RESET”)
5. To release from this mode, press the [
?/1
] button or disconnect
the power plug to turn off the system.
• Display of total error
EM ** ED **
EM** : The number of mechanical errors.
ED** : The number of no disc errors after chucking the disc.
• Display of mechanical errors
M *
M* : The number of mechanical error (“0” is latest one)
(Press [
>
] button to display the next error)
• Display of no disc errore
D
*
$$%%&&##00
D* : The number of no disc error (“0” is latest one)
(Press [
>
] button to display next error)
$$ : Error type
01 : Focus error
02 : GFS error
03 : Setup error
%% : Not used
&& :
00 : No disc judgment without chucking retry.
01 : No disc judgment after chucking retry.
## : The state when judged as no disc
01 : Stop
02 : Setup
03 : TOC reading
04 : Access
05 : Playback
06 : Pause
07 : Manual search (Play)
08 : Manual search (Pause)
Display of
Total Error
Display of
Mechanical
Errors
FF button
AMS (+)
button
AMS (+)
button
AMS (–)
button
AMS (–)
button
FR button
FF button FR button
Display of
No Disc
Errors