Sony hcd-tb20 Скачать руководство пользователя страница 30

Страница: 30 / 36

Messages

One of the following messages may appear or
flash in the display during operation.

Cannot Edit

• You tried to label a CD TEXT disc.

• You tried to use Tape Select Edit for discs

containing over 20 tracks.

Name Full

There are already 50 disc titles stored in the
system.

No Disc

There is no CD in any of DISC 1 – 3.

NO STEP

You have cleared all the tracks you propgramed.

OVER

You have reached the end of the CD while
pressing

during play or pause.

Push STOP!

You pressed PLAY MODE/TUNING MODE
during play.

Step Full!

You tried to program 26 or more tracks (steps).

TAPE

No Tab

You cannot record the tape because the tab has
been removed from the cassette.

No Tape

There is no tape in the tape deck.

Open

You performed a tape operation with the tape deck
lid not completely shut.

Problems and remedies (continued)

If the system still does not operate

properly after performing the above

measures, reset the system as

follows:

Unplug the power cord.

Plug the power cord back into the wall
outlet.

Press

?/1

to turn on the system.

Press

?/1

and ENTER/YES at the

same time.

Unplug the power cord.

Plug the power cord back into the wall
outlet, then press

?/1

to turn on the

system.

The system is reset to the factory settings. All
the settings you made such as the preset
stations, clock, timer and CD disc titles are
cleared and must be set again.

Note

You cannot reset the system in the Power Saving
Mode.

Downloaded From Disc-Player.com Sony Manuals

Содержание hcd-tb20





































Результаты поиска

Содержание hcd-tb20

Отзывы:

Похожие инструкции для hcd-tb20

Бренды по названию

Популярные бренды

Sony hcd-tb20, Руководство по эксплуатации

Результаты поиска

Содержание hcd-tb20

Отзывы:

Похожие инструкции для hcd-tb20

Бренды по названию

Популярные бренды