Sony HCD-S400, Руководство по обслуживанию

Страница: 11 / 74

11
HCD-S400
4-1. VERSION DISPLAY MODE
Procedure:
1.
Press the A button on the main unit or 1 button on the
remote commander to turn the set on.
2. Press three buttons of
FUNCTION
,
. PREV
and
A
simultaneously for two seconds.
3. The message “VER. 1. ** ” is displayed for a moment.
4-2. JOG TEST MODE
Procedure:
1.
Press the
A
button on the main unit or
1
button on the
remote commander to turn the set on.
2. Press three buttons of
BAND
,
x
and
A
simultaneously.
3. The fluorescent indicator displays “JOG 0”. The value “JOG
0” increases like +1, +2, +3... if rotating the VOLUME knob
clockwisw,or it decreases like –1, –2, –3,.... if rotating counter-
clockwise.
4. To exit from this mode, press the
POWER
button to turn the
set off.
4-3. KEY TEST MODE
Procedure:
1.
Press the
A
button on the main unit or
1
button on the
remote commander to turn the set on.
2. Press three buttons of DISPLAY , x and A simultaneously.
3. The message “KEY NUM 0” is displayed and “0” blinks.
4. Each time a button is pressed, “KEY NUM 0” value increases.
However, once a button is pressed, it is no longer taken into
account.
5. When all buttons are pressed, “KEY NUM 11” appears and
the number blinking is stopped.
6. To exit from this mode, press the POWER button to turn the
set off.
4-4. DISPLAY TEST MODE
Procedure:
1.
Press the
A
button on the main unit or
1
button on the
remote commander to turn the set on.
2. Press three buttons of
BAND
,
X
and
A
simultaneously.
3. All segments are turned on.
4. When the NEXT
>
button is pressed, the display will light
up as follows.
5. Press the NEXT > button, confirm the display.
6. Press the NEXT > button, all segments are turned off.
7. Every pressing of the
NEXT >
button turns on each
segments in the same order.
8. To exit from this mode, press the POWER button to turn the
set off.
4-5. OSD TEST MODE
Procedure:
1.
Press the
A
button on the main unit or
1
button on the
remote commander to turn the set on.
2. Set the FUNCTION to DVD.
3. While pressing two buttons of
DISPLAY
and
x simultaneously, turn the VOLUME knob clockwise.
4. The Test Mode Menu is displayed on the TV screen.
5. To execute each function, select the number on the remote
commander.
6. See the following section for explanation in detail.
7. To exit from this mode, press the POWER button to turn the
set off.
4-6. GENERAL DESCRIPTION
The Test Mode allows you to make diagnosis and adjustment easily
using the remote commander and monitor TV. The instructions,
diagnostic results, etc. are given on the on-screen display (OSD).
4-7. STARTING TEST MODE
Set the FUNCTION to DVD with the main unit power on. Next,
while pushing the
x
button and the
[DISPLAY]
button on the main
unit at the same time, turn the VOLUME knob to the right to start
Test Mode and display the menu shown below on the TV screen. At
the bottom of the menu screen, the model name and revision number
are displayed.
To execute each function, select the desired menu and press its
number on the remote commander. To exit from Test Mode, press
the
[POWER]
button.
Test Mode Menu
0. Syscon Diagnosis
1. Drive Auto Adjustment
2. Drive Manual Operation
3. Mecha Aging
4. Emergency History
5. Version Information
6. Video Level Adjustment
Exit: POWER Key
_
Model : HCX-1030_xx
Revision : 1.xxx
SECTION 4
TEST MODE
ALL 1 DISCS AUTO TITLE TRACK CHAPTER INDEX HTUNED M MONO ST S
dB REPEAT 1
kHz PROGRAM
MHz SHUFFLE PRO LOGIC
DIGITAL FM AM
NTSC PBC ANGLE
dts PCM
;
;
ALL 1 DISCS AUTO TITLE TRACK CHAPTER INDEX HTUNED M MONO ST S
dB REPEAT 1
kHz PROGRAM
MHz SHUFFLE PRO LOGIC
DIGITAL FM AM
NTSC PBC ANGLE
dts PCM
;
;