— 10 —
SECTION 3
TEST MODE
Function Key combination Description
Initialization
STOP + POWER OFF All preset data is re-set to the initial
(default) value.
Model display
STOP + DISC 1 Mode name is displayed.
Destination display
STOP + DISC 2
Destination is displayed.
Version display
STOP + DISC 3 Version number of the
microprocessor is displayed.
CD aging mode
STOP + DISC SKIP/EX-CHANGE Set discs to DISC 1 and DISC
3. The following operations are repeated when aging
starts:
1. DISC 1: TOC Read
2. Plays back the last music of the DISC 1
3. DISC 3 : TOC Read
4. Plays back the last music of the DISC 3.
5. STOP
6. Tray is open and closed.
TAPE aging mode
STOP + PLAY A Insert a commercially available cassette tape (10
min) to the decks A and B. When aging starts, each tape is rewound
and the following
operations are repeated:
1. TAPE A: FWD PLAY for one minute
2. TAPE A: FWD STOP for one second
3. TAPE A: FWD PLAY for three minutes
4. TAPE A: FWD FF to tape end
5. TAPE B: FWD PLAY for one minute
6. TAPE B: FWD REC PAUSE for one second
7. TAPE B: FWD REC for three minutes
8. TAPE B: FWD FF to tape end
9. TAPE B: REV PLAY for one minute
10. TAPE B: REV REC PAUSE for one second
11. TAPE B: REV REC for three minutes
12. TAPE B: REV FF to tape end.
CD service mode
STOP + OPEN/CLOSE The message “CD S - -” is displayed on the
screen. The sled is moved to the outer circumference
while the FF button is pressed. Also, the SLED is moved to the
inner
circumference while the REW button is pressed. After pressing the
PLAY
button, FOCUS is turned ON, CLV-S is set, TRACKING and SLED
servos
are turned OFF and ADDRESS 3 = 3F, 37 is set.
Display
STOP + DBFB All displays are turned ON.
Balance adjustment value
STOP + DISPLAY/DEMO The balance adjustment value is
displayed.
Key check
STOP + FILE SELECT Function of the pressed key is displayed.
