manualshive.com logo in svg

Sony HCD-MDX10 - Compact Disk Deck Receiver Component, Руководство по обслуживанию

Поделиться
Скачать
Sony HCD-MDX10 - Compact Disk Deck Receiver Component Скачать руководство пользователя страница 24

– 24 –

“CPLAY MID” 

n

 “CPLAY OUT” 

n

 “CPLAY IN”  

“CPLAY MID” 

n

 “CPLAY OUT” 

n

 “CPLAY IN”  

5-5-1. Operating the Continuous Playback Mode

1. Entering the continuous playback mode

1

Set the disc in the unit. (Whichever recordable discs or discs for playback only are available.)

2

Rotate the  AMS  dial and display “CPLAY MODE”.

3

Press the  ENTER/YES  button to change the display to “CPLAY MID”.

4

When access completes, the display changes to “C1 = 

 AD = 

”.

Note : The numbers “ ” displayed show you error rates and ADER.

2. Changing the parts to be played back

1

Press the  ENTER/YES  button during continuous playback to change the display as below.

When pressed another time, the parts to be played back can be moved.

2

When access completes, the display changes to “C1 = 

 AD = 

”.

Note : The numbers “ ” displayed show you error rates and ADER.

3. Ending the continuous playback mode

1

Press the  MENU/NO  button. The display will change to “CPLAY MODE”.

2

Press the  

§

EJECT (MD)  button to remove the disc.

Note : The playback start addresses for IN, MID, and OUT are as follows.

IN

40h cluster

MID 300h cluster
OUT 700h cluster

5-5-2. Operating the Continuous Recording Mode (Use only when performing self-recording/palyback check.)

1. Entering the continuous recording mode

1

Set a recordable disc in the unit.

2

Rotate the  AMS  dial and display “CREC MODE”.

3

Press the  ENTER/YES  button to change the display to “CREC MID”.

4

When access completes, the display changes to “CREC (

)” and “REC” indicator lights up.

Note : The numbers “ ” displayed shows you the recording position addresses.

2. Changing the parts to be recorded

1

When the  ENTER/YES  button is pressed during continuous recording, the display changes as below.

When pressed another time, the parts to be recorded can be changed. “REC” indicator goes off.

2

When access completes, the display changes to “CREC (

)” and “REC” indicator lights up.

Note : The numbers “ ” displayed shows you the recording position addresses.

3. Ending the continuous recording mode

1

Press the  MENU/NO  button. The display changes to “CREC MODE” and “REC” indicator goes off.

2

Press the  

§

EJECT (MD)  button to remove the disc.

Note 1 : The recording start addresses for IN, MID, and OUT are as follows.

IN

40h cluster

MID

300h cluster

OUT

700h cluster

Note 2 : The  MENU/NO  button can be used to stop recording anytime.
Note 3 : Do not perform continuous recording for long periods of time above 5 minutes.
Note 4 : During continuous recording, be careful not to apply vibration.

5-5-3. Non-Volatile Memory Mode (EEP MODE)

This mode reads and writes the contents of the non-volatile memory.
It is not used in servicing. If set accidentally, press the  MENU/NO  button immediately to exit it.

Содержание HCD-MDX10 - Compact Disk Deck Receiver Component

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды