Sony HCD-LS1 - Compact Hi-fi Stereo System, Руководство по обслуживанию

Страница: 18 / 54

18
STC POS GEAR SL
LDG PLATE CAM SL
2 LDG plate cam SL
1 washer
(Fig. G. 2)
(Fig. G. 1)
Note: Never use nail when
turning the emergency
gear SL.Otherwise, the
gear tooth may be broken.
emergency gear SL
d
Note: DO NOT remove the STC POS Gear
SL together with the STC Motor SL Ass’y
(Stocker) (M3), always replace it alone.
If they are removed at the same time and
the gear in the stocker height becomes out
of position.
1 washer
2 STC POS gear SL
MA chassis SL S ass’y
STC POS gear SL
c
c
b
b
Note: Assemble the STC POS gear
SL so that the mark on the
STC POS gear SL meets the
mark on the MA chassis SL
S ass’y.
POSITIONING OF THE STC POS GEAR SL REQUIRED
LDG plate cam SL
emergency gear SL
Note: Never use nail when
turning the emergency
gear SL.
Otherwise the gear
tooth may be broken.
e
d
e d
d
(Fig. G. 3)
(1) Turn the emergency gear SL in the direction of the arrow as shown
in Fig. G. 1 until it stops.
(2) Assemble LDG plate cam SL so that the center of the LDG plate cam
SL, mark on the LDG plate cam SL and the center of the shaft are
aligned on one line as shown in Fig. G. 2.
(3) Turn the emergency gear SL in revers until the marks , on
LDG plate cam SL are almost aligened as shown in Fig. G. 3. (This
operation is required to return to the mechanism in standby state.)
INSTALLING THE LDG PLATE CAM SL
POSITIONING OF THE LDG PLATE CAM SL IS REQUIRED.