20
HCD-GNZ77D/GNZ88D
Procedure:
1. Press
?
/
1
button to turn on the system.
2. Press
[TUNER/BAND]
button repeatedly to select the “AM”.
3. Press
?
/
1
button to turn off the system.
4. Press
[ILLUMINATION]
button and
?
/
1
button simultaneously.
The system will turn on automatically. The message “AM 9K
STEP” or “AM 10K STEP” appears on the fluorescent indicator
tube and thus the channel step is changed.
[DVD SHIP MODE (WITH MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable to
vibration and clears all data including preset data stored in the
RAM to initial conditions. Use this mode when returning the
set to the customer after repair.
Procedure:
1. Press
?
/
1
button to turn on the system.
2. Select DVD function.
3. Press
x
button,
[DIRECTION]
button and
?
/
1
button
simultaneously during “DVD NO DISC” condition. The system
will turn off automatically.
4. After the “STANDBY” blinking display finishes, a message
“MECHA LOCK” appears on the fluorescent indicator tube and
the DVD ship mode is set.
[DVD SHIP MODE (WITHOUT MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press
?
/
1
button to turn on the system.
2. Select DVD function.
3. Press
[DVD]
button and
?
/
1
button simultaneously during “DVD
NO DISC” condition. The system will turn off automatically.
4. After the “STANDBY” blinking display finishes, a message
“MECHA LOCK” appears on the fluorescent indicator tube and
the DVD ship mode is set.
[DVD TRAY LOCK MODE]
• This mode let you lock the disc tray. When this mode is
activated, the disc tray will not open when
[OPEN/CLOSE]
button or
[DISC SKIP/EX-CHANGE]
button is pressed. The
message “LOCKED” will appears on the fluorescent indicator
tube.
2. Select DVD function.
3. Press
button simultaneously and
hold down until “LOCKED” or “UNLOCKED” appears on the
fluorescent indicator tube (around 5 seconds).
• This mode prevents the system from turning off automatically
when TCM is not connected. Therefore, measurements can be
done even when TCM is not connected during production.
Procedure:
1. When the system is turned off, press
[EQ BAND/MEMORY]
button,
[TAPE A/B]
button and
?
/
1
button simultaneously. The
system will turn on automatically.
2. The message “TCM OFFLINE” will appears on the fluorescent
indicator tube.
• To release from TCM Offline Mode
To release from this mode, perform “COLD RESET” or turn off
the power supply.
[TV/SAT SWITCHING]
• This mode let you switch from TV to SAT and vice-versa.
Procedure:
1. Press
?
/
1
button to turn on the system.
2. Select TV function.
3. Press
[TV/SAT]
button and
?
/
1
button simultaneously. The
function will change to SAT. Press the same buttons again to
change from SAT to TV.
[DVD COLOR SYSTEM]
• This mode let you change the color system of the video output
from PAL to NTSC or vice-versa. This mode is not available for
Latin American and Russian models.
Procedure:
1. Press
?
/
1
button to turn on the system.
2. Select DVD function.
3. Press
?
/
1
button again to turn off the system.
4. Press
X
button and
?
/
1
button simultaneously. The system
will turn on automatically.
The message “COLOR PAL” or “COLOR NTSC” appears on
the fluorescent indicator tube.
[REMOTE DISABLE MODE]
• This mode let you disable the remote commander reception.
When this mode is activated, the system will not response if the
button on the remote commander is pressed. The message “RM
DISABLE” appears on the fluorescent indicator tube.
This mode is essential for conducting test and repairing when
no interruption from the other remote commander is expected.
This mode is cancelled automatically when the system is turned
off.
Procedure:
1. Press
?
/
1
button to turn on the system.
2. Press
x
button,
[DIRECTION]
button and
[DISC 3]
button
simultaneously until “SIRCS ON” or “SIRCS OFF” appears on
the fluorescent indicator tube.
[PROGRESSIVE]
• This mode let you change the format of the video output from
the COMPONENT OUT jacks among PROGRESSIVE AUTO,
PROGRESSIVE VIDEO and INTERLACE.
Procedure:
1. Press
?
/
1
button to turn on the system.
2. Press
[DVD]
button and
[DISPLAY]
button simultaneously. “P
AUTO” or “P VIDEO” or “INTERLACE” appears on the
fluorescent indicator tube.
[MTK FIRMWARE DISPLAY]
• This mode is used to display the MTK firmware version.
Procedure:
1. Press
?
/
1
button to turn on the system.
2. Press
[DVD]
button to switch to DVD function.
3. Press
?
/
1
button again to turn off the system.
4. Press
x
button and
?
/
1
button. The system turns on
automatically.
5. The version of MTK firmware appears on the TV screen.
[DVD SERVICE MODE]
• This mode let you make diagnosis and adjustment easily by
using the remote commander and the TV. The instructions,
diagnostic results, etc. are given on the on-screen display.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
