Sony HCD-GN1100D, Руководство по обслуживанию, Страница: 19 / 106

19
HCD-GN1100D
Procedure:
1. Press
?/1
button to turn on the system.
2. Select DVD function.
3. Press
x
button,
[SOUND FLASH]
button and
?/1
button
simultaneously during “DVD NO DISC” condition. The
system will turn off automatically.
4. After the “STANDBY” blinking display finishes, a message
“MECHA LOCK” appears on the fluorescent indicator tube and
the DVD ship mode is set.
5. The Memory is clear after AC Power OFF.
[DVD SHIP MODE (WITHOUT MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press
?/1
button to turn on the system.
2. Select DVD function.
3. Press
[DVD]
button and
?/1
button simultaneously during
“DVD NO DISC” condition. The system will turn off
automatically.
4. After the “STANDBY” blinking display finishes, a message
“MECHA LOCK” appears on the fluorescent indicator tube and
the DVD ship mode is set.
[DVD TRAY LOCK MODE]
• This mode is used to lock the disc tray. When this mode is
activated, the disc tray will not open when
[OPEN/CLOSE]
button or
[EX-CHANGE/DISC SKIP]
button is pressed. The
message “LOCKED” appears on the fluorescent indicator tube.
Procedure:
1. Press
?/1
button to turn on the system.
2. Select DVD function.
3. Press
x
button and
[OPEN/CLOSE]
button simultaneously
and hold down until “LOCKED” or “UNLOCKED” appears
on the fluorescent indicator tube (around 5 seconds).
[TV/SAT SWITCHING]
• This mode let you switch from TV to SAT and vice-versa.
Procedure:
1. Press
?/1
button to turn on the system.
2. Select TV function.
3. Press
[TV/SAT]
button and
?/1
button simultaneously. The
function will change to SAT. Press the same buttons again to
change from SAT to TV.
[DVD COLOR SYSTEM]
• This mode let you change the color system of the video output
from PAL to NTSC or vice-versa.
Procedure:
1. Press
?/1
button to turn on the system.
2. Select DVD function.
3. Press
?/1
button again to turn off the system.
4. Press X button and
?/1
button simultaneously. The system
will turn on automatically.
5. The message “COLOR PAL” or “COLOR NTSC” appears on
the fluorescent indicator tube.
[REMOTE COMMANDER DISABLE MODE]
• This mode let you disable the remote commander reception. When
this mode is activated, the system will not response if the button
on the remote commander is pressed. The message “Remote
Disable” appears on the fluorescent indicator tube. This mode is
essential for conducting test and repairing when no interruption
from the other remote commander is expected. This mode is
cancelled automatically when the AC power supply is turned off.
Procedure:
1. Press
?/1
button to turn on the system.
2. Press
x
button,
[FLANGER]
button and
[DISC 2]
button
simultaneousl untill“RemoteDisable” or “RemoteEnable”
appears on the fluorescent indicator tube.
[TCM OFFLINE MODE]
• This mode is used to prevent the system from turning off auto-
matically when TCM is not connected. Therefore, measurements
can be done even when TCM is not connected during produc-
tion.
• Procedure:
1. When the system is turned off, press
[EQ BAND]
button,
[TAPE
A/B]
button and
?/1
button simultaneously. The system will
turn on automatically.
2. The message “TCM OFFLINE” will appears on the fluorescent
indicator tube.
• To release from TCM Offline Mode, perform “COLD RESET”
or turn off the power supply.
[DVD FIRMWARE DISPLAY]
• This mode is used to display the DVD firmware version.
• Procedure:
1. Press
?/1
button to turn on the system.
2. Press
[DVD]
button to switch to DVD function.
3. Press
?/1
button again to turn off the system.
4. Press
x
button and
?/1
button.
The system turns on automatically.
5. The version of DVD firmware appears on the TV screen.
[DVD OFFLINE]
• This mode is used to enable audio output from the function other
than DVD function in order to check the audio output from the
system without connecting DVD.
This model is also used to prevent system enter protector mode
when DVD is not connected.
• Procedure:
1. When the system is turnd off, press
x
button,
[FLANGER]
button and
[DISC 1]
button simultaneously and the message
“DVD OFFLINE” appears on the fluorescent indicator tube.
• To release from DVD Offline Mode
To release from this mode, perform “COLD RESET” or turn off
the power supply.
[VACS DISPLAY]
• This mode is used to check the VACS level.
• Procedure:
1. Press
?/1
button to turn on the system.
2. Press
x
button,
[SOUND FIELD]
button and
[DISC 2]
button
simultaneously.
3. The VACS Level Display, the fluorescent indicator tube displays
“VATB F APC”. “V” represent VACS , A represent VACS level
which is triggered by signal level, “T” represent Thermal VACS
NEO, B represent VACS level which is triggered by temperature,
“F” represent FAN is triggered by software to turn in to high