Sony HCD-FX300i AEP, Руководство по обслуживанию

Страница: 9 / 50

HCD-FX300i
9
2-7. BASE UNIT
Note 1:
This illustration sees the top panel block from base unit side.
1
four floating screws
(PTPWH M2.6)
3 two vibration proof rubbers
(red)
4
two vibration proof rubbers (green)
6
cover (D1)
7
base unit
2
5
four claws
Note 2:
Four claws might be fixed by bond.
Please fix four claws by the bond when
you replace the cover (D1).
2-8. OPTICAL PICK-UP BLOCK (DA11MMVGP)
3
wire (flat type) (16 core) (optical pick-up)
1 Remove four solders.
2
Solder the short-land.
4
BD73 board block
(US, CND, UK, SP, TW, KR, TH, AUS)
BD73U board block (AEP, E2, E51, MX)
7
optical pick-up block
(DA11MMVGP)
5
tapping screw (P2)
6
shaft (support)
Note 2:
When assembling the optical pick-up block,
remove the solder of short-land after
connecting the wire (flat type) (16 core).
Note 1: When disconnecting the wire (fl at type) (16 core) of optical pick-up block, solder the short-land.
Ver. 1.2
• Abbreviation
AUS :
Australian model
CND : Canadian model
E2
: 120V AC area in E model
E51 : Chilean and Peruvian models
KR : Korean model
MX : Mexican model
SP : Singapore model
TH : Thai model
TW : Taiwan model