28
GB
1
Press
Z
PUSH OPEN on the unit.
2
Load a recorded/recordable tape into
the cassette holder.
You can use TYPE I (normal) tape.
1
Load a tape.
2
Press TAPE
N
.
Other operations
You can record a whole CD on a tape.
You can use TYPE I (normal) tape.
Use buttons on the unit for the operation.
1
Load a recordable tape.
2
Press DVD
NX
and load a disc you
want to record.
3
Press
x
twice to cancel the Resume
Play.
4
Press CD SYNC.
The tape deck stands by for recording.
“REC” flashes.
5
Press
z
REC PAUSE/START.
Recording starts.
Tips
• If the tape reaches the end of the front side before
completing the recording, the tape stops
automatically and the CD/DVD player enters
Resume Play mode.
• To continue the recording on the reverse side, press
x
twice to first cancel the Resume Play, eject and
reload the tape, then perform steps 1 and 2 of “To
perform Synchro Recording from a desired track”
(page 28). You can then continue Synchro Recording
from the desired track.
To perform Synchro Recording
from a desired track
You can select the first track in Synchro
Recording.
1
After performing steps 1 to 4, press
.
or
>
repeatedly to select the desired track
number.
2
Press
z
REC PAUSE/START while the
selected track number is flashing.
Recording starts.
Tape – Play
Loading a tape
Playing a tape
To
Do this
Stop play
Press
x
.
Fast-forward or
rewind
Press
m
or
M
.
Switch to TAPE
function from
another source
Press TAPE
N
.
Playback starts automatically
when a tape is loaded.
Cut the sound
Press MUTING.
Press MUTING again or
to restore sound.
Remove a tape
Press
Z
PUSH OPEN on the unit
in stop mode.
With the side
you want to
play/record
facing forward.
Tape – Recording
Recording your favorite
CD tracks on a tape
— CD-TAPE Synchro Recording
