![Sony HCD-DH3 Скачать руководство пользователя страница 18](http://html.mh-extra.com/html/sony/hcd-dh3/hcd-dh3_service-manual_416361018.webp)
18
HCD-DH3/DH5BT/DH7BT
DVD COLOR SYSTEM
This mode let you change the color system of the video output from
PAL to NTSC or vice-versa. This mode is not available for US,
Canadian, AEP and Russian models.
Procedure:
1. Press the
I
/
1
button to turn on the system.
2. Press the
DVD
N
button to select the “DVD”.
3. Press the
I
/
1
button to turn off the system.
4. Press two buttons of
X
and
I
/
1
simultaneously. The system
will turn on automatically. The message “COLOR PAL” or
“COLOR NTSC” appears on the fluorescent indicator tube.
BT TEST MODE
This mode is used to check the firmware version and address of
bluetooth module. This mode is not available for HCD-DH3.
Procedure:
1. Press the
I/
1
button to turn on the system.
2. Press the
BLUETOOTH
N
or
[BLUETOOTH]
button to select
“BLUETOOTH”.
3. Press three buttons of
x
,
[DSGX]
and
[BLUTOOTH OPR]
simultaneously, the message “BT Test In” is displayed on the
fluorescent indicator tube. Then, the display is automatically
changed to the firmware version of bluetooth.
4. Press the
[DISPLAY]
button, address of bluetooth device is
displayed on the fluorescent indicator tube.
5. To release this mode, press the
I/
1
button.
COLD RESET
The cold reset clears all data including preset data stored in the
RAM to initial conditions.
Procedure:
1. Press the
I/
1
button to turn on the system.
2. Press three buttons of
x
,
[DISPLAY]
and
I/
1
simultaneously.
3. The message “RESET” appears on the fluorescent indicator
tube, and the system is reset.
PANEL TEST MODE
This mode is used to check the fluorescent indicator tube, LEDs,
keys, model, destination and software version.
Procedure:
1. Press three buttons of
x
,
[VOLUME --]
and
[DISPLAY]
simultaneously.
2. All LEDs and segments in fluorescent indicator tube are lighted
up.
3. Press the
[DISPLAY]
button, the software version display mode
is activated, and model and destination information appears
on the fluorescent indicator tube.
4. In the software version display mode, each time the
[DISPLAY]
button is pressed, the display changes from MC version,
MMLib version, Bolero version in this order, and returns to
the model and destination information (DH3/DH5BT).
In the software version display mode, press the
[DISPLAY]
button, MC version appears on the fluorescent indicator tube.
Also, press the
[DISPLAY]
button again, the display returns to
the model and destination information (DH7BT).
5. Press the
[DSGX]
button, the key check mode is activated,
“KEY 0 0 0” appears on the fluorescent indicator tube.
6. In the key check mode, each time a button is pressed, the
numerical value corresponding to each button is displayed on
the fluorescent indicator tube.
7. To release from this mode, press three buttons in the same
manner as step 1 or disconnect the power cord.
TUNER STEP CHANGE
The step interval of AM channels can be toggled between 9 kHz
and 10 kHz. This mode is not available for AEP and Russian models.
Procedure:
1. Press the
I
/
1
button to turn on the system.
2. Press the
[TUNER/BAND]
button to select the “AM”.
3. Press the
I
/
1
button to turn off the system.
4. Press two buttons of
[TUNER/BAND]
and
I/
1
simultaneously.
The system will turn on automatically. The message “AM 9k
Step” or “AM 10k Step” appears on the fluorescent indicator
tube and thus the channel step is changed.
This mode is used to lock the disc slot. When this mode is activated,
the disc will not slot out when
button is pressed. The message
“LOCKED” appears on the fluorescent indicator tube.
Procedure:
3. Press two buttons of
x
and
Z
simultaneously and hold down
until “LOCKED” or “UNLOCKED” appears on the
fluorescent indicator tube (around 5 seconds).
SECTION 4
TEST MODE
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299