![background image](http://html.mh-extra.com/html/sony/hcd-cl5md/hcd-cl5md_service-manual_420593003.webp)
3
HCD-CL5MD
SELF-DIAGNOSIS FUNCTION
The self-diagnosis function consists of error codes for customers which are displayed automatically when errors occur, and error codes which
show the error history in the test mode during servicing. For details on how to view error codes for the customer, refer to the following box
in the instruction manual. For details on how to check error codes during servicing, refer to the following “Procedure for using the Self-
Diagnosis Function (Error History Display Mode)”.
Procedure for using the Self-Diagnosis Function (Error History Display Mode).
Note:
Perform the self-diagnosis function in the “error history display mode” in the test mode. The following describes the least required
procedure. Be careful not to enter other modes by mistake. If other modes are entered accidentally, press the MENU/NO button to
exit the mode.
1.
Connect the mains lead to the mains while pressing the DIMMER , FUNCTION , and
x
buttons together, then release the DIMMER,
FUNCTION , and
x
buttons simultaneously. While the test mode is set. “[Check]” will be displayed.
2.
Move
./>
left and right to display “[Service]” and press the ENTER/YES button.
3.
Move
./>
left and right to display “Err Display”.
4.
Press the ENTER/YES button to enter the error history mode. “op rec tm” will be displayed.
5.
Select the item to be displayed or executed using
./>
.
6.
Press the REC MODE button to display the selected item.
7.
Press the REC MODE button another time to return to step 4.
8.
Pressing the MENU/NO button displays “Err Display” and exits the error history display mode.
9.
To exit the test mode, press the REPEAT button. This sets the standby state and ends the test mode.
C41/Cannot Copy
The sound source is a copy of a commercially
available music software, or you tried to record a
CD-R (Recordable CD).
c
The Serial Copy Management System prevents
making a digital copy (Refer to Operating
Instruction on page 48). You cannot record a
CD-R.
E0001/MEMORY NG
There is an error in the internal data that the system
needs in order to operate.
c
Consult your nearest Sony dealer.
E0101/LASER NG
There is a problem with the optical pickup.
c
The optical pickup may have failed. Consult your
nearest Sony dealer.
Self-diagnosis display
This system has a Self-diagnosis display
function to let you know if there is a system
malfunction. The display shows a code made
up of three letters and a message alternately to
show you the problem. To solve the problem
refer to the following list. If any problem
persists, consult your nearest Sony dealer.
C11/Protected
The MD is protected against erasure.
c
Remove the MD and slide the tab to close the
slot (Refer to Operating Instruction on page 17).
C12/Cannot Copy
You tried to record a CD or MD with a format that
the system does not support, such as a CD-ROM.
c
Remove the disc and turn off the system once,
then turn it on again.
C13/REC Error
Recording could not be performed properly.
c
Move the system to a stable place, and start
recording over from the beginning.
The MD is dirty or scratched, or the MD does not
meet the standards.
c
Replace the MD and start recording over from
the beginning.
C13/Read Error
The MD deck cannot read the disc information
properly.
c
Remove the MD once, then insert it again.
C14/Toc Error
The MD deck cannot read the disc information
properly.
c
Replace the MD.
c
Erase all the recorded contents of the MD using
the All Erase function (Refer to Operating
Instruction on page 27).
Содержание HCD-CL5MD
