15
Playing Back Tapes (on either Deck A or B)
This section describes basic playback from either deck A or B.
1
Press TAPE.
3
4
2
p
SYSTEM POWER
n
ON
3
Press DOLBY NR to select the DOLBY NR
setting.
4
Press
·
to start playback.
Ø
ON
ø
OFF
DOLBY NR
When the tape ends, playback stops automatically.
·
To stop playback, rewinding or fast forwarding,
press
p
.
To pause,
press
P
.
To resume playback,
press
P
again or
·
.
To rewind the tape,
press
0
.
To fast-forward the tape,
press
)
.
Notes
• During playback or recording on one deck, do not operate
the other deck. (When both decks A and B are in playback
mode, only playback from deck A will be audible.)
• Before turning the power off, be sure to stop playback or
recording by pressing
p
.
What is the Dolby NR* system?
Dolby NR (noise reduction) system reduces tape hiss noise in
low-level, high-frequency signals. The system boosts these
signals in recording and lowers them in playback.
When listening to a tape recorded with Dolby NR, set
DOLBY NR to ON.
* Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol
a
are trademarks of Dolby
Laboratories Licensing Corporation.
VIDEO 1/MD
VIDEO 2
PHONO
TUNER
CD
TAPE
"
TAPE
" appears on the display.
2
Press
§
to open the cassette compartment,
insert the tape with the side to be played
facing you and close the cassette
compartment.
DECK A
§
EJECT
4 2
1
0 )
P
