![Sony HAR-LH500 Скачать руководство пользователя страница 11](http://html.mh-extra.com/html/sony/har-lh500/har-lh500_operating-instructions-manual_417374011.webp)
Recording to HDD
11
Recording to HDD
Notes on recording
Before recording
• You cannot select a play list as the recording
destination.
• You cannot record over an existing track. If
you select an album with existing tracks as
the recording destination, the recorder
automatically starts recording from the end of
the existing tracks.
After recording
The HDD play mode automatically switches to
Normal Play.
Automatic conversion of digital
sampling rates
A built-in sampling rate converter
automatically converts the sampling frequency
of various digital sources to the 44.1 kHz
sampling rate of the recorder.
Maximum number of recordable
tracks
Total number of the tracks recorded on the
HDD cannot exceeds 40,000, not counting the
tracks in play lists.
If “Track Full!” appears in the display
when you select the recording
destination
The album already contains 400 tracks, the
maximum number of tracks that can be
recorded to a single album. Select another
album. When using the REC-IT function, the
recording will be cancelled automatically.
If “Drive Full!” appears in the display
while recording to the HDD
Further recording is impossible because there is
not enough recordable space on the HDD or the
maximum number of recordable tracks has
been attained on the HDD. To continue
recording to the HDD, compress the data by
converting tracks to the ATRAC3 format (page
32) or erase unnecessary tracks or albums.
Note on text information
Text data on CDs with CD TEXT content are not
recorded by the recorder when the CDs are recorded
through the DIGITAL OPTICAL IN connector.
Recording a CD to the
HDD
–– CD-HDD Synchro-Recording/
High-Speed CD-HDD Synchro-
Recording
Tips
• You can use the ALBUM dial on the recorder
instead of the
<
,
,
, or ENTER button on the
remote to select and enter items in Edit Menu or
Setup Menu.
To select an item: Turn the ALBUM dial towards
+/–.
To enter a selection: Press the ALBUM dial.
• You can also use the ALBUM +/– buttons instead of
the
<
/
,
buttons to select items in Edit Menu or
Setup Menu.
1
Turn on the amplifier and set the
source selector to the position for this
recorder.
2
Press
@
/
1
to turn on the recorder.
3
Press CD (or CD/HDD on the recorder
to light up the CD indicator).
4
Load a CD on the disc tray.
5
Press MENU/NO.
“Setup Menu” appears in the display.
6
Press
<
/
,
repeatedly until
“Sync Normal” (or “Sync High”)
appears in the display, then press
ENTER or YES.
7
Press
<
/
,
repeatedly to select the
recording speed, then press ENTER or
YES.
To
Select
Perform the normal-speed
Synchro-Recording
Sync Normal
Perform the high-speed
Synchro-Recording
Sync High (factory
setting)
Playing CDs
continued