Sony HANDYCAM PMW-350L, Руководство по эксплуатации

Страница: 149 / 183

Saving and Loading Lens Files
149
Chapt
er
7
Sa
ving and
L
oadi
ng Us
er Set
ting Dat
a
To cancel the load, select [Cancel], and
then press the MENU knob.
If you select [Execute], a list box of lens files
appears. File numbers where “No File” is
displayed are empty file numbers.
4
Select the desired file number, and then
press the MENU knob.
A confirmation message appears.
5
To execute the load, select [Execute],
and then press the MENU knob.
To cancel the load, select [Cancel], and
then press the MENU knob.
If you selected Lens Recall SxS in step 2 , the
ACCESS lamp lights when you execute the
load (in blue on the right-side panel and in
orange in the card slot section).
When the specified lens file has been loaded
from the SxS memory card, a completion
message appears and the ACCESS lamp goes
out.
When you are using a lens that support serial
communication, you can set up the camcorder by
automatically loading the lens file that
corresponds to the lens settings (Lens Auto Recall
function).
To use the Lens Auto Recall function, set FILE
>Lens >Lens Auto Recall in the setup menu to
one of the following.
On: Load the lens file that corresponds to the
model name.
Off: Do not use the Lens Auto Recall function.
Serial Number: Load the lens file that
corresponds to the model name and serial
number (when the lens supports
communication of the serial number).
If the lens does not support communication of the
serial number, both settings load the lens file that
corresponds to the model name.
Loading Lens Files Automatically