Sony Handycam HDR-HC3 Скачать руководство пользователя

Страница: 93 / 135

E:\SONY\2661355111\01US09TBS.fm

HDR-HC3

2-661-355-

(1)

Tro
ubl
es
hoo

ting

The CHG (charge) lamp does not light while the battery pack is being charged.

• Slide the POWER switch to OFF (CHG) (p. 15).
• Attach the battery pack to the camcorder correctly (p. 15).
• Connect the power cord to the wall outlet properly.
• The battery charge is completed (p. 15).

The CHG (charge) lamp flashes while the battery pack is being charged.

• Attach the battery pack to the camcorder correctly (p. 15). If the problem persists, disconnect

the AC Adaptor from the wall outlet and contact your Sony dealer. The battery pack may be
damaged.

The power turns off frequently although the remaining battery time indicator
indicates that the battery pack has enough power to operate.

• A problem has occurred in the remaining battery time indicator, or the battery pack has not

been charged enough. Fully charge the battery again to correct the indication (p. 15).

The remaining battery time indicator does not indicate the correct time.

• Ambient temperature is too high or too low, or the battery pack has not been charged enough.

This is not a malfunction.

• Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace

it with a new one (p. 15, 116).

• The indicated time may not be correct in certain circumstances. For example, when you open

or close the LCD panel, it takes about 1 minute to display the correct remaining battery time.

The battery pack discharges too quickly.

• Ambient temperature is too high or low, or the battery pack has not been charged enough.

This is not a malfunction.

• Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace

it with a new one (p. 15, 116).

A problem occurs when the camcorder is connected to the AC Adaptor.

• Turn off the power, and disconnect the AC Adaptor from the wall outlet. Then, connect it

again.

An unknown picture appears on the LCD screen or viewfinder.

• The camcorder is in [DEMO MODE] (p. 64). Touch the LCD screen or insert a cassette or a

“Memory Stick Duo” to cancel [DEMO MODE].

An unknown indicator appears on the screen.

• A warning indicator or message appears on the screen (p. 107).

LCD screen/viewfinder

Continued

Содержание Handycam HDR-HC3








































































































































Результаты поиска

Содержание Handycam HDR-HC3

Отзывы:

Похожие инструкции для Handycam HDR-HC3

Бренды по названию

Популярные бренды

Sony Handycam HDR-HC3, Руководство по эксплуатации

Результаты поиска

Содержание Handycam HDR-HC3

Отзывы:

Похожие инструкции для Handycam HDR-HC3

Бренды по названию

Популярные бренды