Sony Handycam HDR-FX1, Руководство по эксплуатации, Страница: 86 / 112

Troubleshooting
86
Playback
A vertical band appears when
recording a bright subject. • This phenomenon is called the smear effect. This is not a malfunction.
Tiny spots in white appear on the
screen. • The spots appear at a slower shutter speed. This is not a malfunction.
Oblique stripes appear on the screen. c Set the ZEBRA/PEAKING switch to OFF (p. 31).
Picture appears too bright on the
screen, and the subject does not
appear on the screen.
c
Cancel the back light function (p. 25).
Symptom Cause and/or Corrective Actions
Cannot play back. c If the tape has reached the end, rewind the tape (p. 42).
Cannot play back in reverse direction. c Reverse playback is not possible with the tape recorded in the HDV
format.
Horizontal lines appear on the
picture. The displayed pictures are
not clear or do not appear.
c
Clean the head using the cleaning cassette (p. 96).
Fine patterns flicker, diagonal lines
look jagged.
c
Adjust [SHARPNESS] to the – (soften) side in the PICTURE PROFILE
function (p. 34).
No sound or only a low sound is
heard.
c
Set [MULTI-SOUND] to [STEREO] on the (AUDIO SET) menu
(p. 56).
c
Turn up the volume (p. 42).
c
On the (AUDIO SET) menu, adjust [AUDIO MIX] from the [ST2]
(additional sound) side until the sound is heard appropriately (p. 56).
c When you are using an S VIDEO cable or a component video cable,
make sure the red and white plugs of the A/V connecting cable are
connected as well (p. 46).
The sound breaks off.
c
Clean the head using the cleaning cassette (p. 96).
The date search and index search do
not work. • There is a blank section at the beginning or in the middle of the tape. This
is not a malfunction.
“---” is displayed on the screen. • The tape you are playing was recorded without setting the date and time.
• A blank section on the tape is being played.
• The data code on a tape with a scratch or noise cannot be read.
END SEARCH does not work. • The POWER switch is set to CAMERA.
• The cassette was ejected after recording (p. 44).
• The cassette is new and has nothing recorded.
END SEARCH does not work
correctly. • There is a blank section at the beginning or in the middle of the tape. This
is not a malfunction.
No picture appears during END
SEARCH or Rec Review. • The tape was recorded in both HDV and DV formats. This is not a
malfunction.
Symptom Cause and/or Corrective Actions