background image

GB

5

This equipment must not be co-
located or operated in conjunction 
with any other antenna or transmitter.

CAUTION

You are cautioned that any changes 
or modifications not expressly 
approved in this manual could void 
your authority to operate this 
equipment.

Note:

This equipment has been tested and 
found to comply with the limits for a 
Class B digital device, pursuant to 
Part 15 of the FCC Rules.
These limits are designed to provide 
reasonable protection against 
harmful interference in a residential 
installation. This equipment 
generates, uses, and can radiate 
radio frequency energy and, if not 
installed and used in accordance with 
the instructions, may cause harmful 
interference to radio 
communications. However, there is 
no guarantee that interference will 
not occur in a particular installation. If 

this equipment does cause harmful 
interference to radio or television 
reception, which can be determined 
by turning the equipment off and on, 
the user is encouraged to try to 
correct the interference by one or 
more of the following measures:
– Reorient or relocate the receiving 

antenna.

– Increase the separation between 

the equipment and receiver.

– Connect the equipment into an 

outlet on a circuit different from 
that to which the receiver is 
connected.

– Consult the dealer or an 

experienced radio/TV technician 
for help.

The supplied interface cable must be 
used with the equipment in order to 
comply with the limits for a digital 
device pursuant to Subpart B of Part 
15 of FCC Rules.

This device complies with Industry 
Canada licence-exempt RSS 
standard(s).
Operation is subject to the following 
two conditions: (1) this device may 
not cause interference, and (2) this 
device must accept any interference, 
including interference that may cause 
undesired operation of the device.

Hereby, Sony Corporation, declares 
that this equipment is in compliance 

Declaration of Conformity

Trade Name: SONY
Model No.: HDR-PJ340
Responsible Party: Sony 
Electronics Inc.
Address:

16530 Via Esprillo,
San Diego, CA 92127 
U.S.A.

Telephone No.: 858-942-2230

This device complies with Part15 of 
the FCC Rules. Operation is subject 
to the following two conditions: (1) 
This device may not cause harmful 
interference, and (2) this device 
must accept any interference 
received, including interference 
that may cause undesired 
operation.

For Customers in Canada

For Customers in Europe

Содержание Handycam HDR-CX330

































Отзывы: